Finding Water Tank Tops For Your Toilet

If you're looking to replace your toilet's water tank, you're in luck! It is possible to buy just the tank that matches your toilet. You can search for the model number, which is usually printed inside the tank, and find the right one online or at a hardware store. There are also toilet repair kits available that come with parts needed for common repairs. Some common parts of a toilet tank include the handle, supply line, chain, float, flush valve, overflow tube, fill valve, flapper, and lever. The cost of a new tank can vary, but it is generally cheaper than buying a whole new toilet.

Characteristics of Water Tank Tops for Toilets

Where to buy water tank tops for toilets

If your toilet tank top is broken, you can replace it without having to replace the entire toilet. Toilet tank tops are sold separately from the bowls, so you can get any tank that fits your model.

Before you start looking for a new tank top, you will need to know the make and model of your toilet. If you don't know the make and model, you will need to know the colour of your toilet and some measurements.

There are many online stores that sell toilet tank tops, and some of them are PlumbersStock, PlumbingSupply.com, and This Old Toilet. PlumbersStock has a large selection of wholesale replacement toilet tank lids to choose from and offers free shipping. PlumbingSupply.com offers free shipping on orders over $99. This Old Toilet has a wide range of replacement toilet tank lids, and you can filter your search by brand.

You can also check your local hardware store, such as Home Depot, to see if they have toilet tank tops that fit your toilet.

How to find the right size water tank top for your toilet

If you're looking to replace your toilet's water tank top, there are a few steps you can follow to ensure you find the right size. Here's a guide to help you through the process:

Step 1: Identify the Make and Model of Your Toilet

Start by identifying the make and model of your toilet. This information is usually printed or embossed on the toilet tank or bowl. It may be located inside or outside the tank, so be sure to check thoroughly. Knowing the make and model will make it easier to find a matching tank top.

Step 2: Take Measurements

If you're unable to find the make and model, don't worry. You can still find the right tank top by taking some measurements. Measure the size of the gasket on your toilet bowl, as you'll need to buy a tank that has the same size hole for the gasket. Additionally, take measurements of the tank itself, including its width, depth, and height. These measurements will come in handy when searching for a replacement.

Step 3: Consider the Colour and Style

To ensure your new tank top matches your existing toilet, pay attention to the colour and style. Take note of the colour of your toilet bowl and tank, and try to find a tank top that is a close match. Also, consider the style of your toilet. For example, does it have a rounded or rectangular shape? Finding a tank top with similar styling will help maintain the cohesive look of your toilet.

Step 4: Search for Replacement Parts

With the information you've gathered, you can now begin your search for a replacement tank top. There are several online retailers and plumbing supply stores that offer a wide range of toilet tank tops. Provide them with the make and model of your toilet, or the measurements you've taken, to find the best match. Some websites, such as PlumbersStock, offer a large selection of replacement parts for various toilet brands.

Step 5: Consult with a Plumber

If you're having difficulty finding the right tank top or are unsure about the process, it's always a good idea to consult with a professional plumber. They will have the expertise and resources to help you find the correct size and style of the tank top for your specific toilet model. They can also guide you through the installation process to ensure a proper fit.

Remember, replacing your toilet's water tank top is a straightforward task, but it requires attention to detail to ensure the new part fits correctly and matches the style of your toilet. By following these steps and seeking professional assistance when needed, you'll be able to find the right size water tank top for your toilet.

How to replace a water tank top for your toilet

Step 1: Remove the Old Tank

Before you start, make sure you have a bucket on hand to catch any water. Then, follow these steps:

• Turn off the water supply valve. Locate the metal valve on the wall with a hose connected to the bottom of your toilet's tank and turn the handle counterclockwise as far as it will go.
• Drain the tank by holding down the flush lever. You may need to lift the lid off the tank and set it aside first.
• If there is still water in the tank, soak it up with a sponge or cloth.
• Unscrew the supply hose from the bottom of the tank. Use pliers or a wrench if you need a better grip.
• Loosen the bolts inside the tank with a screwdriver. Grip the nut with locking pliers and turn the bolt head counterclockwise with the other hand. Repeat for all bolts.
• If the bolts are rusty, use a hacksaw blade to cut through them.
• Lift the tank off the toilet bowl and set it aside.

Step 2: Install the New Tank

• Purchase a new tank that matches the size of your toilet bowl's gasket (the hole where water travels from the tank to the bowl). Ensure the colour matches for a cohesive look.
• Prepare the new tank by pushing the tank-to-bowl gasket (a rubber ring) onto the bottom of the tank.
• Slide a rubber washer onto each of the tank bolts.
• Set the new tank on top of the toilet bowl, lining up the holes.
• Feed the bolts through the holes from the inside of the tank. Press down on the bolts to form a tight seal with the washers.
• Tighten a nut onto each bolt to secure the tank in place. Use a wrench or locking pliers to tighten further, but be careful not to overtighten.

Step 3: Final Connections

• Clip the refill hose to the top of the flush valve.
• Screw the supply hose onto the bottom of the tank. Again, be careful not to overtighten.
• Turn on the water supply. As the tank fills, watch the water rise to ensure the flush mechanisms are working correctly.
• Check for leaks around the bolts, supply hose, and gasket.

Tips:

• Get a helper to hold the tank steady while you work.
• Always ensure the water supply is turned off to avoid leaks.
• Don't overtighten bolts or the supply hose, as this can crack the tank.

What to do if your water tank top is broken

If your water tank top is broken, you can take the following steps:

• Locate the make and model of your toilet: Before you can start looking for a new water tank top, you will need to identify the make and model of your toilet. This information is usually printed inside the tank or bowl. If you're unable to find this information, you can also search for the colour and measurements of your toilet.
• Find a replacement water tank top: Once you have the necessary information, you can search for a replacement water tank top online or at a hardware store. It is possible to buy just the tank, which can be more cost-effective than replacing the entire toilet.
• Install the new water tank top: When you have the replacement water tank top, you can install it yourself or contact a plumber to help with the installation. Make sure to follow any included instructions and take the necessary precautions to avoid damaging the new tank.
• Dispose of the broken water tank top properly: If your old water tank top is beyond repair, dispose of it properly. Depending on the materials, you may be able to recycle it or take it to a salvage yard.
• Consider preventative measures: To prevent future issues, consider taking preventative measures such as choosing a suitable tank location, securing the tank, and maintaining it regularly.

It is important to act promptly when your water tank top is broken to avoid further damage and ensure the continued functioning of your toilet.

Different types of water tank tops for toilets

The toilet tank top or cover is an important part of the toilet setup. While it may not play a functional role in the tank's operation, it helps to ensure that water does not splash over the sides of the tank and onto the floor. It also helps to make your bathroom look neater. Some toilet tank tops include a flush button on top, but this is not always the case.

There are many different types of toilet tank tops available in the market, offered by manufacturers such as American Standard, Toto, Danze, Kohler, and more. These tank tops come in a variety of colours, including white, bone, almond, biscuit, linen, and Mexican sand.

In addition to colour, toilet tank tops can also differ in the type of flushing mechanism they feature. Modern toilets often use alternative trigger systems, with a button instead of a classic trigger or handle.

Another way in which toilet tank tops can vary is in the type of flapper they use. There are three common types of flappers: rubber, seat disk, and tank ball. Rubber flappers are the most common type as they are the least likely to fail and are usually made of plastic. Seat disk flappers are the oldest type but are not ideal as they are bulky, difficult to repair, and prone to damage. Tank ball flappers are the buoyant rubber ball that sits on top of the water in the toilet tank, and while they are generally reliable, the chain length must be adjusted correctly to avoid problems like faulty seals that waste water.

Toilet tank tops are available in a range of materials, including porcelain, marine grade, wood, and urethane.

Frequently asked questions