The Perfect Finish: Achieving Optimal Protection With Duraseal Oil-Based Polyurethane

DuraSeal's oil-based polyurethane finish is a popular choice for those looking to add a layer of protection to their wooden floors. The product provides an amber hue, depth, and richness to the wood while also offering excellent durability and stain resistance. While it is a hard-wearing and cost-effective option, it is important to note that it takes longer to cure than water-based alternatives. So, how many coats are recommended?

DuraSeal Quick Dry Oil-Based Finish is a transparent, tough finish that provides excellent durability and stain resistance

DuraSeal's oil-based finish is formulated to provide remarkable stain resistance and excellent durability. It is a popular choice for those seeking to add a rich, amber hue to their wood floors. The product is designed to be applied in multiple coats, with a maximum of one layer applied every 24 hours. This means that the application process can be quite time-consuming compared to water-based alternatives, which can be applied more frequently within a shorter timeframe.

The key advantage of DuraSeal's oil-based finish is its ability to enhance the depth and richness of wood floors. The finish has an amber hue that darkens over time, creating a warm and elegant appearance. This unique characteristic sets it apart from water-based finishes, which tend to remain clear. If you are seeking a more natural and traditional look for your wood floors, the oil-based option is an excellent choice.

In terms of durability, DuraSeal's oil-based finish offers robust protection against dirt, spills, and everyday wear and tear. While it may take longer to cure than water-based alternatives, the resulting finish is well worth the wait. It is important to note that oil-based finishes are generally more susceptible to dents, so it is crucial to consider the specific requirements of your project.

When using DuraSeal Quick Dry Oil-Based Finish, it is recommended to follow the manufacturer's instructions for the best results. Ensure that the wood surface is properly prepared and sealed before applying the finish. By following the recommended application process and allowing adequate curing time between coats, you can achieve a beautiful and long-lasting finish for your wood floors.

DuraSeal Water-Based Finish provides the same durability as oil-based finishes but with no need for a hardener

DuraSeal's Water-Based Finish is a single-component product that provides the same durability as traditional oil-based finishes without the need for a hardener. It is a urethane resin that is as easy to apply as DuraSeal's standard Polyurethane but with the convenience of water clean-up.

DuraSeal Water-Based Finish is suitable for both residential and commercial interior hardwood floors. It provides the amber look of an oil-based finish but without the lengthy curing time. While oil-based polyurethane will take 24 hours to cure, DuraSeal's Water-Based Finish has a recoat time of 2-3 hours between coats. This means that up to four coats can be applied in one day.

The product is applied using a synthetic bar applicator to provide the smoothest finish. It should be applied at 500 sq. ft. per gallon to achieve a proper film build and prevent lapping and applicator marks. It is recommended that the floor is prepared according to NWFA methods, sanding with a 120 or 150 grit screen, and then vacuumed and wiped with a damp cloth to remove all dust.

DuraSeal Water-Based Finish is more expensive than its oil-based counterpart and is susceptible to surface scratches. However, it has a lower VOC (volatile organic compound) count and is ideal for use when a clear finish is required, such as over white-washed or grey-washed floors.

DuraSeal Premium Polyurethane+ provides a clear protective finish with resistance to chipping, peeling, soaps, detergents, water, pets, fruit acids, ink, and alcohol

DuraSeal Premium Polyurethane+ is a protective finish product for wood floors and surfaces. It provides a clear, tough, and durable finish with resistance to chipping, peeling, soaps, detergents, water, pets, fruit acids, ink, and alcohol. It is recommended for professional use only and should only be used on wood substrates.

Before applying DuraSeal Premium Polyurethane+, it is important to ensure that the surface is properly prepared. For wood floors, this involves using a power floor sanding machine to remove any old finish and sanding the floor bare and smooth. It is recommended to use only 100-grit paper for the final sanding. Paint removers should not be used to remove the finish, as power sanding is the only recommended method for removing old finishes from floors. The floor must be free of dust, dirt, wax, grease, oil, or any other contaminants before applying the finish.

For application over a stain, it is not recommended to use DuraSeal Premium Polyurethane+ over white or pastel stains. The stain should be allowed to dry for 24 hours before recoating with the finish. A light sanding of the stain with very fine sandpaper is recommended before applying the finish. To achieve maximum body, seal out natural rosins, and/or achieve the lightest possible natural wood color, apply one coat of DuraSeal Quick Dry Sealer to bare, unstained wood, following the directions.

For other wood surfaces, whether old work (previously finished) or new work (bare wood), the surface must be clean, smooth, wax-free, dust-free, and dry. The product should be stirred thoroughly before and during use, but it should not be agitated or machine-shaken. Two coats should be applied evenly with a clean brush or lambswool applicator. Allow the first coat to dry, then lightly sand it with 100-grit paper. Wipe with a tack rag to remove all dust before applying the second coat. If a third coat is required, wait at least four days before applying, following the same procedure as for the previous coats.

DuraSeal Premium Polyurethane+ provides a durable and protective finish for wood floors and surfaces, offering resistance to various substances and helping to maintain the beauty and longevity of the wood.

DuraSeal 450 VOC Polyurethane is a tough, transparent, oil-based finish that provides excellent durability and stain resistance

DuraSeal 450 VOC Polyurethane is a robust, transparent, oil-based finish that provides excellent durability and stain resistance. It is a tough, protective finish that is ideal for wood floors, giving them depth and richness while safeguarding them from dirt, spills, and stains. This product is available in satin, gloss, and semi-gloss sheens, offering a range of options for achieving the desired look.

When applying DuraSeal 450 VOC Polyurethane, it is crucial to follow the recommended guidelines for the best results. Firstly, ensure proper ventilation during application and drying to avoid overexposure to vapors. Keep the container closed when not in use, and avoid transferring the contents to other containers. The surface to be treated should be prepared according to NWFA specifications, and it is essential to seal it with either the DuraSeal Penetrating Finish or the DuraSeal Quick-Dry Sealer, allowing it to dry thoroughly.

Stir the DuraSeal 450 VOC Polyurethane well before and during use. For application, use a brush or lambs wool applicator, and apply thin coats at a coverage rate of 500 square feet per gallon (750 square feet per gallon for the 450 VOC compliant product). It is important to note that thicker coats will result in extended drying times. Allow the first coat to dry for at least eight hours, and then abrade it with a maroon pad with sanding strips or a 120-grit screen. If the drying time exceeds 24 hours, ensure thorough abrasion.

After the first coat has dried and been abraded, use a cloth moistened with mineral spirits to tack the floor and remove any dust. Then, apply the second coat of DuraSeal 450 VOC Polyurethane in the same manner as the first coat. If desired, additional coats can be applied, allowing each coat to dry for at least eight hours. Remember to abrade with a maroon pad or a 120-grit screen between each coat for optimal results. If the drying time exceeds 24 hours between coats, be sure to abrade thoroughly.

DuraSeal 450 VOC Polyurethane is a versatile and durable finish that can enhance the beauty and longevity of wood floors. By following the recommended application guidelines, you can ensure the best results and protect your floors from everyday wear and tear.

DuraSeal Polyurethane is available in three gloss levels: satin, semi-gloss, and gloss

DuraSeal Polyurethane is a premium finish for wood floors that offers excellent durability and stain resistance. It is available in three gloss levels: satin, semi-gloss, and gloss. Each gloss level will provide the same level of protection, but will offer a different aesthetic to the finished floor.

The DuraSeal Polyurethane range is oil-based, providing a rich depth of colour to the wood. The oil-based formula also offers an amber hue, which will darken over time. This should be considered when choosing the number of coats to apply. The more coats of DuraSeal Polyurethane applied, the darker the floor will become over time.

DuraSeal recommends applying one layer of oil-based polyurethane every 24 hours. This means that if you are applying multiple coats, you will need to allow 24 hours between each application. For example, if you are applying three coats of DuraSeal Polyurethane in a gloss finish, you will need to allow 48 hours after the first coat before the floor is ready for use.

The number of coats you choose to apply will depend on the desired level of protection and the final colour you wish to achieve. For a lighter finish, two coats may be sufficient. However, for added protection and a deeper colour, you may choose to apply three or more coats. It is important to note that each additional coat will darken the floor over time due to the amber hue of the oil-based formula.

When applying DuraSeal Polyurethane, it is essential to follow the recommended preparation and application methods. The floor must be free of any wax, grease, or dirt, and the product should be applied with a synthetic bar applicator for the smoothest finish.

Frequently asked questions