Transform Your Polo: Creative Cuts For A Unique Look

how to cut a polo t shirt

There are many ways to cut a polo t-shirt. Whether it's a V-neck cut, a one-shoulder cut, a cropped cut, a sleeveless cut, or an overall distressed cut, all you need is a pair of sharp scissors and a little courage. You can also try cutting off the collar, removing the interfacing, and using it as ribbing for your new neckline. Cutting up your old polo t-shirts can be a fun and creative way to update your wardrobe and give your old clothes a new lease of life.

Characteristics Values
Cutting tools Sharp scissors, hair-cutting scissors, or fabric scissors
Marking tools Pen or washable chalk
Cutting styles V-neck cut, one-shoulder cut, cropped cut, sleeveless cut, or distressed cut

shunvogue

Cut off the collar

Cutting off the collar of a polo shirt is a great way to change up the style and make it more comfortable to wear. Here is a step-by-step guide on how to do it:

Firstly, lay your polo shirt on a flat surface and smooth out any creases. Using sharp scissors, carefully cut across the bottom of the collar, ensuring that you cut as close as possible to the seam line. Take your time with this step to achieve a clean cut.

Once you have cut off the collar, check your work. Ensure that you have cut close enough to the seam, and trim any loose threads or frays that may be remaining. Be careful not to cut the edge of the new collar.

If you want to further customise your shirt, you could consider cutting off the sleeves or hemming it to a different length. You can also save the collars you cut off for future projects or to attach to another shirt.

After cutting off the collar, you may want to wash the shirt to test its durability. Some people have reported loose threads appearing after a few washes, so it is important to check that your shirt is still in good condition.

Finally, style your new collarless polo shirt! You can wear it as-is for a more casual look, or dress it up with a necklace or other accessories. Cutting off the collar of a polo shirt is a simple way to give your wardrobe a fresh, new look.

shunvogue

Mark the new neck hole with pins

To mark the new neck hole with pins, you will first need to try the shirt on backward, with the buttons facing your back. This will allow you to visualise the new neckline and mark it with pins. You can then cut out the new neck hole, following the line of the pins. This method ensures that the new neck hole is symmetrical and even.

When trying on the shirt, you can adjust the placement of the pins to change the depth and width of the new neck hole. For a wider and deeper neckline, you can place the pins further apart. For a more narrow and shallow neckline, place the pins closer together.

It is important to mark the new neck hole with pins before cutting to ensure accuracy and symmetry. This step also allows you to visualise the new neckline and make any necessary adjustments.

Once you are happy with the placement of the pins, carefully cut along the line of pins to create the new neck hole. It is recommended to use sharp scissors and cut slowly and carefully to achieve a clean edge.

After cutting, you can remove the pins and try on the shirt to check the fit and style of the new neckline. This step allows you to make any necessary adjustments and ensure that the new neck hole is comfortable and flattering.

Marking the new neck hole with pins is a crucial step in altering a polo shirt, as it determines the overall look and feel of the garment. It is important to take your time and ensure accuracy when marking and cutting the new neck hole.

shunvogue

Cut out the neck hole

To cut out the neck hole of a polo t-shirt, you will need a pair of sharp scissors, and optionally, a pen or chalk to mark the fabric.

First, cut off the collar and set it aside for later. Next, try the shirt on backward, with the buttons at the back, and mark where you want the new neck hole to be with pins. Now, cut out the neck hole along the line of the pins. If you didn't use pins, carefully cut along the line you have eyeballed.

At this point, you can try the shirt on again to see if you are happy with the size of the neck hole. If you are, great! If not, carefully cut the hole to your desired size.

shunvogue

Remove the rest of the collar with a seam ripper

Once you have cut off the collar, it's time to remove the rest of it with a seam ripper. Seam rippers are handy tools that help you quickly and easily remove stitches. They have a sharp, pointed end that can fit under each individual stitch to lift and separate it from the fabric.

To start, insert the sharp end of the seam ripper under a stitch and gently lift it up. Then, pull the thread through the fabric with your fingers. You can also use the seam ripper to cut the thread if needed. Work your way around the collar, removing the stitches one by one until the entire collar is detached from the shirt. Be careful not to damage the fabric of the shirt as you work.

After removing the collar, you will be left with small holes where the stitches used to be. These holes can be reinforced or hidden by sewing over them with a needle and thread. Choose a thread colour that matches your shirt as closely as possible for a neat finish.

Using a seam ripper is a quick and easy way to remove the collar from your polo shirt. It's a simple process that can transform your shirt and give it a new look.

shunvogue

Cut the sleeves

To cut the sleeves of a polo t-shirt, you will need a pair of sharp scissors, and optionally, a pen or chalk to mark the fabric.

First, lay the shirt on a flat surface, smoothing it out completely. Then, decide how long you want the sleeves to be. If you want to shorten them, cut off the trim. If you want to remove the sleeves completely, cut horizontally across the sleeve, stopping at the shoulder seam. Then, following the same seam, cutsection by section until you reach the armpit. Flip the sleeve over and continue cutting parallel along the seam until the sleeve comes off completely. Repeat on the other side.

If you want to create a sleeveless cut with a more distressed look, you can cut diagonal lines through both the front and back of the fabric by the armpit of one sleeve. Once you have cut off one sleeve, line it up with the other sleeve so that they are symmetrical. Then, cut off the other sleeve.

Frequently asked questions

You will need a pair of sharp scissors, and some courage! You may also want to use a pen or chalk to mark the fabric before cutting.

Turn the shirt inside out and lay it on a flat surface with the front facing up. Mark the middle of the collar with a pen and cut horizontally underneath. Continue cutting until you reach the desired width, ensuring that it is symmetrical, then cut vertically down. Now cut diagonally from the ends of the horizontal cuts to the bottom of the vertical line. Flip the shirt around and adjust the hole as needed. Stretch out the sides you cut to smooth the fabric.

Lay the shirt on a flat surface and smooth it out completely. Cut horizontally across the sleeve, stopping at the shoulder seam. Following the same seam, cut downward until you reach the armpit. Flip the sleeve over and continue cutting parallel along the seam until the entire sleeve comes off. Repeat on the other side. Stretch out the cut areas to smooth the edges.

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment