Transform Your T-Shirt With A Triangle Cut

There are many ways to cut a t-shirt to create a new style. Cutting a triangle in a t-shirt can be done to create a V-neck, a one-shoulder cut, or a slash-back t-shirt. This can be done by folding the shirt in half lengthwise, drawing the desired shape, and cutting along the lines. It's important to only cut through the back of the shirt and not the front. After cutting, the fabric can be stretched to create a more worn-in look and the shirt can be washed to get rid of any chalk or pen marks.

Cutting a triangle to create a choker cut-out shirt

Firstly, lay your shirt on a flat surface with the front facing up. Then, decide how deep you want your V-neck to be and mark this with chalk. Take into consideration that you will be cutting a triangle out of the collar, so ensure you are happy with the depth of the V-neck before cutting.

Next, draw a triangle with chalk, with the point of the triangle facing the collar of the shirt. The triangle can be as wide as you like, but remember that the wider it is, the more revealing it will be. Now, cut along the lines of the triangle you have drawn. Start by cutting one edge of the collar down to the point of the triangle, then cut up the other side. Finally, cut along the collar, ensuring you don't cut the collar off.

And that's it! You now have a choker cut-out shirt. If your cut-out is very low, you can wear a cute, strappy bralette underneath.

Cutting a triangle to create a one-shoulder cut

Prepare Your T-Shirt and Tools:

Start by laying your T-shirt flat on a clean surface, ensuring it is smooth and free of wrinkles or folds. If your T-shirt is not freshly laundered, consider ironing it to remove any creases. Gather your tools, including fabric scissors, chalk or a fabric marker, a measuring tape or ruler, and pins.

Mark the Cut:

Before you begin cutting, you need to determine the placement of your one-shoulder cut. Put on the T-shirt and decide which side you want to cut. Make a small notch at the top of the desired shoulder, where the seams meet, as a starting point for your cut. Remove the T-shirt and place it back on your flat surface, ensuring the front and back are aligned at the seams.

Cut the Triangle:

Using your chalk or fabric marker, draw a vertical line parallel to the collar, about two inches in length, starting at the notch you made. Then, continue the line diagonally down to the corner of the sleeve, forming a triangle. Carefully cut along the marked line, making sure to cut through both the front and back fabric layers.

Trim the Collar:

Flip the cut-out shoulder over to the back. You will notice one uncut piece of fabric by the collar. Trim this part by following the curve of your previous cut, starting from the corner of the sleeve and moving up to where the collar begins. Cut this section off in a triangle shape.

Stretch and Finish:

Gently stretch out the fabric around the cut-out area to give it a more worn-in and relaxed look. If desired, repeat the cutting process on the other side to create a cold-shoulder style. You can leave the edges raw, or fold them over and pin them down before ironing for a neater finish.

Now you have successfully created a one-shoulder cut in your T-shirt! Feel free to style it with high-waisted jeans or skirts, and add some accessories like layered necklaces or bold earrings to accentuate the unique neckline.

Cutting a triangle to create a slash-back T-shirt

To create a slash-back T-shirt, you will need a baggy T-shirt, fabric scissors, and a pen or chalk. Here is a step-by-step guide:

Step 1: Fold the T-shirt

Fold the back of the T-shirt in half lengthwise, so that the back is on the outside and the front is on the inside. Pull the front of the shirt out so that you don't accidentally cut it when cutting the back.

Step 2: Decide on the shape

Slash-back T-shirts usually have horizontal slashes in the back, cut at different lengths to create a simple shape like a heart or an upside-down triangle. Decide on the shape you want and divide it in half lengthwise.

Step 3: Draw the shape

Use tailor's chalk on dark fabrics and a tailor's pen on light fabrics. Draw half of your desired shape along the folded edge of the shirt. The shape can be any size you want, but larger shapes tend to work better for this style. Keep in mind that the wider the shape, the more revealing the final design will be. Extend the shape from just below the collar to about halfway or two-thirds of the way down the shirt.

Step 4: Cut the slits

Use fabric scissors to cut slits into the folded edge, stopping at the lines that you drew. Space the slits about a finger's width apart. Make sure you are only cutting through the back of the shirt.

Step 5: Unfold the shirt

Unfold your shirt. You should now have a full heart or upside-down triangle filled with horizontal slashes. Gently tug on the strips of fabric to curl the edges inside the shirt, making any unevenness less visible and the strips thinner.

Step 6: Cut the neck, collar, and hem (optional)

You can further customise your T-shirt by cutting off the sleeves, the bottom hem, or around the collar for a more rugged look. Be sure to pull on the cut edges to curl the fabric inwards.

Step 7: Wash the shirt

Finally, wash the shirt by hand or in a washing machine to get rid of any chalk or pen marks. Check the tag on your shirt to find the appropriate temperature and cycle setting.

Cutting a triangle to create a sleeveless cut

To create a sleeveless cut with a triangle, you will need a T-shirt, sharp scissors, and a pen or chalk.

First, turn the shirt inside out and lay it on a flat surface. This will make the seams easier to see and ensure a more precise cut.

Next, decide how wide you want the armholes to be. For a more casual, halter-top look, cut the sleeves with the seams. If you want a neater finish, leave the seams intact. Mark your desired cut with chalk or a pen, then cut along the lines.

To create the triangle, follow these steps:

• Cut the sleeves off, ensuring that the shirt is still inside out.
• Turn the shirt around so that the back is facing you.
• Starting from the armpit, cut diagonally downwards towards the middle of the back.
• Repeat on the other side, ensuring that the cuts are symmetrical.
• Carefully cut off the collar, creating a straight line across the back of the shirt.
• If desired, you can also cut a V-shape or a wider triangle in the back for a more unique look.

Now, you can turn the shirt right side out and admire your handiwork! You have successfully created a sleeveless T-shirt with a triangle cut.

Cutting a triangle to create a V-neck cut

Step 1: Gather Your Materials

You will need a crew-neck shirt, a ruler or measuring tape, stick pins, a fabric marker, fabric scissors, and a seam ripper. If you plan to sew the collar back on, you'll also need a sewing machine or sewing needle and thread that matches your shirt.

Step 2: Measure the Desired Depth of the V-neck

Decide how deep you want the V-neck to be. You can use an existing V-neck shirt as a guide by laying it over your T-shirt and marking the desired depth with a pin. Alternatively, try on the T-shirt, look in the mirror, and mark the spot you want the point of the V to be with a pin.

Step 3: Fold and Mark the T-shirt

Fold your T-shirt in half vertically, ensuring that the neckline, shoulders, and arms match up exactly. Smooth out any wrinkles. Using your ruler and fabric marker, draw a diagonal line from the point where the collar meets the shoulder seam to the marked point of the V.

Step 4: Cut the Collar

Turn the shirt inside out and use a seam ripper or scissors to remove the stitches connecting the collar to the front side of the shirt. Cut through the middle of the collar and along the V-neck outline you drew.

Step 5: Stretch and Pin the Collar

Lay the T-shirt flat with the front side facing you. Cut the detached collar in half and stretch each side along the length of the V-neck, pinning it in place. You may need to stretch the collar slightly to reach the point of the V.

Step 6: Sew the Collar

Using a sewing machine or needle and thread, sew the collar in place, starting at the top and sewing about 1/4 inch away from the edge. Stop sewing about 1 inch above the point of the V. Repeat on the other side, sewing the collar ends together to finish.

No-Sew Option:

If you prefer not to sew, there is a simpler option. After marking the desired depth of the V-neck, fold your T-shirt in half vertically and cut along the marked line, being careful to only cut through the back side of the shirt. Then, cut off the collar directly underneath the seam, and you're done!

Frequently asked questions