Get Crafty: How To Make Your Own Stylish Slops Pants

Are you tired of wearing the same old jeans or sweatpants and want to add some unique and stylish pieces to your wardrobe? Look no further! Slops pants are a trendy alternative that not only provide comfort but also exude a laid-back, effortlessly cool vibe. Whether you have a pair of old jeans lying around or want to repurpose a fabric to create your own custom slops pants, this guide will walk you through the step-by-step process of making these fashionable bottoms. So, grab your sewing machine and let's get started on creating your new go-to pants!

Introduction to making slops pants

Sloppy pants, also known as harem pants or Genie pants, are loose-fitting trousers that have a unique and comfortable style. They are often made from lightweight and breathable fabrics, making them perfect for warm weather. If you're interested in creating your own pair of slops pants, whether for personal use or as a fun sewing project, this blog post will guide you through the process. Let's get started!

To begin, you'll need the following materials:

• Fabric of your choice (preferably lightweight fabrics like cotton, linen, or rayon)
• A pair of pants that fits you well and can be used as a pattern
• Elastic or a drawstring for the waistband
• Basic sewing supplies (sewing machine, thread, scissors, pins, etc.)

Step 1: Prepare the pattern

Start by laying your well-fitting pants flat on a table or cutting mat. Smooth out any wrinkles and make sure it lies flat. Take note of the pant's length, width, and shape. Carefully trace around the outline of the pants onto a large sheet of paper or pattern-making material. Remember to include seam allowances (typically 1-1.5 cm) along the edges.

Step 2: Cut the fabric

Once you have your pattern ready, lay it flat on top of your fabric. Pin it in place to prevent shifting, and then carefully cut along the outer edges of the pattern. Repeat this step to cut two identical pieces—one for the front and one for the back of your slops pants.

Step 3: Sew the crotch seam

With the right sides of the fabric facing each other, align the crotch seam edge of both fabric pieces. Pin it in place, and then sew along the pinned edge using a straight stitch. Finish the raw edges by using either a serger or a zigzag stitch on a regular sewing machine.

Step 4: Sew the inseam and side seams

Next, sew the inseam on both legs of the pants by aligning the inner edges with the right sides together. Pin and sew the inseam using a straight stitch, just as you did for the crotch seam. Finish the raw edges of the inseam with a serger or zigzag stitch.

After sewing the inseam, lay the pants flat and fold them in half along the center, with the right sides of the fabric facing each other. Align the outer edges of the pants and pin in place. Sew the side seams from the bottom edge of the pants up to the crotch using a straight stitch. Finish the raw edges of the side seams with a serger or zigzag stitch.

Step 5: Create the waistband

To make a simple elastic waistband, fold the top edge of the pants down by about an inch (or more, depending on the width of your elastic) and iron it in place. Sew a straight line along the folded edge, leaving a small opening to insert the elastic. Cut a piece of elastic that fits comfortably around your waist and thread it through the opening using a safety pin or a bodkin. Overlap the ends of the elastic by 1 inch and sew them together securely. Finally, close the opening in the waistband.

Alternatively, if you prefer a drawstring, you can create a buttonhole or a small opening in the front of the waistband to thread the drawstring through.

Step 6: Hem the bottom of the pants

Lastly, hem the bottom edges of the pants to your desired length. Fold the raw edge up by about 1-2 cm and iron it in place. Then, fold it up again by the same amount and sew a straight line along the folded edge to secure the hem. Repeat this for both legs.

And there you have it! You've successfully created your own pair of slops pants. Feel free to get creative and personalize your pants by adding pockets, decorative trimmings, or experimenting with different fabric patterns. Once you've mastered the basic construction, you'll be able to make slops pants in various styles and lengths. Have fun and happy sewing!

Materials needed for making slops pants

Slops pants, also known as harem pants or hammer pants, are a comfortable and fashionable choice for casual wear. They are loose-fitting and typically gathered at the ankles. Making your own slops pants is a great way to express your personal style and create a unique wardrobe piece. Here are the materials you'll need to make slops pants:

• Fabric: Choose a lightweight fabric that drapes well, such as rayon, cotton, or linen. Consider the season and the desired style when selecting your fabric. A printed fabric can add a fun and trendy touch to your slops pants, while a solid color can create a more versatile and classic look.
• Elastic: You'll need elastic for the waistband and ankles of the slops pants. The width of the elastic will depend on your personal preference and the desired fit. A 1-inch wide elastic is a common choice for both the waistband and ankles.
• Thread: Use a matching thread color to sew your slops pants. This will help create a clean and professional finish.
• Scissors: A good pair of fabric scissors is essential for cutting the fabric accurately. Make sure they are sharp and comfortable to use.
• Measuring tape or ruler: To ensure the right fit, you'll need a measuring tape or ruler to take your measurements. This will help you determine the length and width of the fabric needed for your slops pants.
• Sewing machine: While it's possible to sew slops pants by hand, having a sewing machine will make the process faster and more efficient. It will also ensure that your stitches are secure and sturdy.
• Pins: Use straight pins to hold the fabric in place while you sew. They will help you achieve clean and even seams.
• Iron and ironing board: Pressing your fabric before and after sewing will give your slops pants a polished look. Use an iron and ironing board to remove any wrinkles and give your seams a crisp finish.

By gathering these materials, you'll be ready to start making your own slops pants. It's important to have all the necessary supplies on hand before beginning your project to ensure a smooth and enjoyable sewing experience. With the right materials and a little creativity, you'll soon have a trendy pair of slops pants that you can proudly wear.

Step-by-step instructions for making slops pants

Slops pants, also known as harem pants or genie pants, are loose-fitting pants that are perfect for comfort and style. Making your own slops pants can be a fun and fulfilling project that allows you to customize the fabric, fit, and details of the pants. In this blog post, we will provide you with step-by-step instructions on how to make slops pants.

Materials you will need:

• Fabric (2-3 yards, depending on your size and desired length)
• Elastic (1-2 inches wide, enough to fit around your waist)
• Sewing machine
• Measuring tape
• Fabric scissors
• Pins
• Thread
• Iron

Step 1: Take your measurements

Start by taking your waist and hip measurements. To determine the length of the pants, measure from your waist to your desired length (e.g., ankle or mid-calf). Write down these measurements as they will guide you throughout the process.

Step 2: Cut the fabric

Fold the fabric in half lengthwise, ensuring that the selvages (finished edges) are aligned. Use the measurements you took in step 1 to mark and cut out two rectangles of fabric. The width of each rectangle should be your hip measurement plus a few inches for ease, divided by two. The length of each rectangle should be the length measurement you took earlier, plus a few inches for hemming and the waistband.

Step 3: Sew the crotch seam

With the right sides of the fabric facing each other, pin the two rectangles together along the long edges. Leave a gap in the middle of one side for the crotch seam. Sew along the pinned edges, using a 1/2 inch seam allowance. Reinforce the crotch area with a zigzag stitch or an additional row of stitches.

Step 4: Sew the inseam

Next, sew the inseam by pinning the leg edges together, right sides facing. Sew along the pinned edges, from the crotch to the bottom of each leg, using a 1/2 inch seam allowance. Remember to reinforce the seam at the crotch area.

Step 5: Create the waistband casing

Fold the top edge of the pants about 1 inch towards the wrong side, then fold it over again by about 1 1/2 inches. Press the folds to create a smooth and even waistband casing. Pin the folds in place.

Step 6: Stitch the waistband casing

Sew around the bottom fold of the waistband casing, leaving a small opening to insert the elastic later. Make sure to backstitch at the beginning and end of the seam to secure it.

Step 7: Insert the elastic

Measure and cut the elastic according to your waist measurement. Attach a safety pin to one end of the elastic and use it to guide the elastic through the waistband casing. Once the elastic is threaded through, overlap the ends by about 1 inch and sew them securely together.

Step 8: Close the waistband casing

Pull the elastic inside the casing and sew the opening closed, securing the elastic in place. Distribute the gathers evenly around the waistband.

Step 9: Hem the bottoms

Try on the pants and adjust the length if needed. Fold the bottom edge of each leg about 1/2 inch towards the wrong side, then fold it over again by about 1 inch. Press the folds and pin them in place. Sew around each leg's hem, approximately 1/4 inch from the folded edge.

Step 10: Finish the pants

Remove any remaining pins and give your pants a final press with an iron. Trim any loose threads.

Congratulations! You have successfully made your own slops pants. Feel free to experiment with different fabrics, colors, and patterns to create your desired style. These pants are versatile and can be dressed up or down for any occasion. Enjoy your new handmade creation!

Tips and tricks for making perfect slops pants

Are you tired of searching for the perfect pair of pants that fit you just right? Why not try making them yourself? Slops pants, also known as baggy pants or harem pants, are loose-fitting and comfortable to wear. They are a great addition to your wardrobe, whether you want to lounge around the house or make a fashion statement. In this article, we will guide you through the process of making slops pants from scratch. So, let's get started!

Materials you'll need:

• Fabric: Choose a lightweight material such as cotton or rayon for a comfortable fit. The amount of fabric you'll need depends on your measurements and desired pant length.
• Elastic: Select an elastic band that fits snugly around your waist. This will be used to gather the pants at the waist.
• Thread: Use a matching thread color to sew your pants.
• Basic sewing supplies: This includes a sewing machine, scissors, pins, measuring tape, and a fabric marker.

Step 1: Taking measurements

Before you begin, it’s important to take accurate measurements. Start with your waist measurement, hip measurement, and desired pant length. Make sure to measure your waist and hips at their widest points. Write down these measurements as you will need them later.

Step 2: Drafting the pattern

To create the pattern for your slops pants, you will need a large piece of paper or pattern paper. Begin by marking a horizontal line for the waistline, using your waist measurement. Then, mark another horizontal line for the hip measurement.

Next, measure down from the waistline to your desired pant length and mark another horizontal line. From both ends of this line, draw diagonal lines towards the waistline. This will create the shape of your slops pants.

Step 3: Cutting the fabric

Using your pattern, cut two identical pieces of fabric. Make sure to fold the fabric in half so that you end up with two mirrored pieces. This will form the front and back of your pants.

Step 4: Sewing the crotch seam

Place the two fabric pieces together, with the right sides facing each other. Pin and sew the crotch seam, starting from the bottom of one leg, going up between the legs, and down the other leg. Use a straight stitch, and reinforce the beginning and end of the seam.

Step 5: Sewing the waistband

Fold the top edge of your pants about 1 inch (2.5 cm) to the inside and press it with an iron. This will create a casing for the elastic. Then, sew around the edge, leaving a small gap to thread the elastic through.

Measure your waist and cut a length of elastic that fits comfortably around your waist. Attach a safety pin to one end of the elastic and guide it through the casing. Make sure the elastic is evenly distributed, then sew the ends of the elastic together by overlapping them and stitching them securely.

Step 6: Finishing touches

To finish your slops pants, you can add cuffs to the bottom of the legs. Measure the circumference of your ankles and cut two rectangles of fabric that are double this measurement in width. Fold them in half lengthwise and sew the short ends together. Then, fold them in half widthwise, wrong sides facing each other, and attach them to the bottom of the legs.

To give your pants a tailored look, you can also sew a topstitch along the crotch seam and the waistband. This will add durability and a clean finish to your garment.

And there you have it - your very own pair of slops pants! Experiment with different fabrics, patterns, and embellishments to make them unique to your style. With a little bit of patience and practice, you'll be able to make the perfect fitting slops pants every time. Happy sewing!

Frequently asked questions