Restring Your Hoodie: A Quick Diy Guide

Losing a hoodie drawstring is a pain, but it doesn't have to ruin your favourite hoodie. Luckily, Buzzfeed and other sources have come up with a quick and easy way to rethread your hoodie drawstring. All you need is a straw, a stapler, and a safety pin. This simple method will save you time and effort, and you'll be wearing your hoodie again in no time, without the fear of uneven or missing strings.

Wash the hoodie and string before restringing

It is always a good idea to wash your hoodie and the string before restringing. This is to ensure that your hoodie is clean and fresh when you wear it, as well as to prevent any dirt from getting stuck in the holes of the hoodie. It is also much easier to restring a hoodie that is not being worn, so washing the hoodie beforehand means you won't be tempted to try restringing it while wearing it.

Washing the hoodie and string before restringing is a simple step that can save you time and hassle in the long run. It is recommended to wash the hoodie in a washing machine, following the care instructions on the label, and to wash the string separately in a delicates bag to prevent it from getting tangled.

If your hoodie has any stains or marks, pre-treat them with a stain remover or a gentle detergent before washing. This will help to ensure that your hoodie looks its best after restringing. You may also want to consider using a fabric softener when washing your hoodie to keep it feeling soft and comfortable.

Once the hoodie and string are clean and dry, you can begin the process of restringing. There are several methods you can use to restring a hoodie, including the safety pin method and the straw and stapler method. By washing your hoodie and string beforehand, you can ensure that the restringing process is as smooth and straightforward as possible.

Overall, washing the hoodie and string before restringing is a crucial step that should not be skipped. It ensures that your hoodie is clean and fresh, and it can also make the restringing process easier and more efficient. So, before you begin restringing, take the time to give your hoodie and string a good wash.

Use a safety pin to restring

To restring a hoodie using a safety pin, start by removing the string from your hoodie. Then, attach the safety pin to one end of the string. Be cautious when handling the safety pin to avoid any injuries. Insert the end of the string with the safety pin into one of the holes in the hoodie.

Pinch the fabric to help guide the safety pin through the hoodie, straightening the fabric as you go. Continue this process until the safety pin emerges from the hole on the other side of the hoodie. Pull the string end with the safety pin through the hole and detach the safety pin from the string.

Washing the hoodie and string before beginning this process is recommended to prevent any dirt from getting stuck in the hoodie's hole. Additionally, it is easier to restring the hoodie when it is not being worn.

This method is a simple and effective way to fix your hoodie and ensure that the strings are even.

Be careful to avoid injury with the safety pin

When restringing a hoodie, it is important to be cautious when using a safety pin to avoid any injuries. Safety pins are commonly used to restring hoodies, but they can cause harm if not handled correctly.

Firstly, ensure that the hoodie and string are washed before beginning the repair. This is important to prevent any dirt from getting stuck in the hoodie's hole during the process. It is also recommended to work on a flat surface and avoid wearing the hoodie while repairing it. This will make it easier to manoeuvre the safety pin through the hoodie.

When using the safety pin, be cautious of the sharp end and always be aware of its position. Keep your hands away from the sharp tip and direct it away from your body and hands. Always use two hands to handle the safety pin, and if possible, wear protective gloves to provide a barrier between your skin and the pin.

Additionally, be mindful of the positioning of the safety pin during the restringing process. Keep the pin as straight as possible to avoid accidental punctures. If the pin needs to be adjusted, use a flat, blunt object such as a spoon or a butter knife to carefully push or pull it into the correct position. Avoid using your fingers for this adjustment to maintain a safe distance from the sharp tip.

In the event of an accidental puncture, immediately tend to the injury. Clean the affected area with soap and water, and apply a bandage if necessary. If the puncture is deep or causes excessive bleeding, seek medical attention.

By following these safety precautions, you can effectively avoid injuries while restringing your hoodie using a safety pin.

Remove the string from the hoodie first

To restring your hoodie, you'll first need to completely remove the string. This is because the new string needs to be fed through the "tunnel" of fabric, and you'll need to attach something to the end of the new string to help guide it through.

Before you start, it's recommended that you wash your hoodie and string to ensure no dirt gets stuck in the hole of the hoodie.

Now, to remove the string. If the string has fallen inside the hoodie, you'll need to retrieve it. Try turning the hoodie inside out and shaking it vigorously to see if the string comes out. If you can see the string but can't reach it, try using a coat hanger or a long, thin object to hook it out.

Once you have the string in hand, gently pull it out of the hoodie, being careful not to rip the fabric. If the string is knotted or tangled, carefully untangle it as you pull it out. If the string is damaged or frayed, it's best to replace it with a new one.

With the old string removed, you can now move on to the next step of feeding the new string through.

Try the straw and stapler method

This method is much faster than using a safety pin. With a straw, you will cover more ground, faster. You will need a straw and a stapler.

Firstly, completely remove the string from your hoodie. Then, insert one end of your drawstring into the straw, pushing it about half an inch beyond the aglet (the plastic or metal covering the end of the lace). Make sure you staple through the soft cotton thread and not the aglet.

Now, staple through the cotton drawstring. Next, feed the straw through the eyelet and gently push it through the fabric tunnel. Gather and smooth the fabric as you go, until the straw reaches the opposite eyelet.

Once the straw is through, gently remove the staple from the drawstring. You can also tie a knot at each end to avoid this issue in the future.

Frequently asked questions