Restring A Hoodie: Paperclip Method

Restringing a hoodie with a paperclip is a simple process that can be done in a few easy steps. First, locate the openings on either side of the hood, usually near the neckline, where the string should pass through. Then, attach the paperclip to one end of the hoodie string, and carefully insert it into one of the openings. Gently push the paperclip through the channel, guiding the string along with it, until it comes out of the other end. Once the string is threaded through, remove the paperclip, adjust the ends so they are even, and tie a knot at each end to prevent the string from slipping back through the openings.

Secure the paperclip to the drawstring

To restring a hoodie with a paperclip, you'll need to secure the paperclip to the drawstring. Here's a detailed guide on how to do this effectively:

Firstly, it is important to ensure you have the right type of paperclip. Look for a large, sturdy paperclip that can be easily threaded through the drawstring. A standard-sized paperclip may be too small and difficult to handle.

Now, let's move on to the threading process. Take the end of your drawstring and thread it through the paperclip, ensuring a snug fit. You want the paperclip to be secure so that it doesn't slip off the drawstring as you work it through the hoodie. Once the paperclip is securely attached, you can move on to the next step.

If your drawstring is still attached to the hoodie but has slipped out of the casing, it's best to remove it completely before beginning. Re-inserting the drawstring is often easier than trying to feed it back through without a tool. So, if necessary, carefully pull out the drawstring until it is completely removed from the hoodie.

Now that your drawstring is ready, it's time to attach the paperclip. Thread the end of the drawstring through the paperclip, ensuring a snug fit. You may need to adjust the paperclip's position so that it sits securely about 1/2 inch (1.3 cm) from the end of the drawstring. This will ensure it doesn't catch on the fabric as you work it through.

With the paperclip securely in place, you are now ready to begin feeding the drawstring back through the hoodie. Let's move on to the next step, where we will guide you through the process of working the paperclip and drawstring through the hoodie's casing.

Insert the paperclip into the hoodie eyelet

Now that you have secured a paperclip to the end of your hoodie's drawstring, it's time to insert the paperclip into the hoodie eyelet and work it through the fabric. Here are some detailed instructions to guide you through this process:

Locate the Eyelets:

Begin by locating the eyelets, which are the circular openings on either side of the hood, usually near the neckline. These are the entry and exit points for your drawstring.

Insert the Paperclip:

Gently push the paperclip, along with the attached drawstring, into one of the eyelets. Take your time and be careful not to poke or tear the fabric. If the eyelet is particularly small, you may need to adjust the paperclip's shape to ease its passage through the opening.

Navigate the Paperclip Through the Fabric:

Once the paperclip is inside the eyelet, you'll need to guide it through the fabric tunnel. Hold the paperclip in place with one hand, and use your other hand to gently scrunch and bunch up the fabric towards the paperclip. This action will create a wave-like motion in the fabric, helping to move the paperclip and drawstring through the tunnel.

Continue Working the Paperclip Through:

Keep holding the paperclip securely and continue to bunch up the fabric, moving it towards the paperclip and then pulling it away. This back-and-forth motion will help navigate the paperclip and drawstring through the fabric. Remember to hold onto the paperclip at all times to prevent it from getting lost inside the casing.

Reach the Opposite Eyelet:

Continue the process of bunching and pulling the fabric until the paperclip emerges from the eyelet on the opposite side. This step may take some time and patience, so don't rush and be gentle with your hoodie to avoid any damage.

By following these steps, you'll successfully insert the paperclip into the hoodie eyelet and guide it through to the other side. Now, you're one step closer to having your hoodie looking good as new!

Work the paperclip through the hoodie fabric

To restring a hoodie with a paperclip, you'll need to begin by securing the paperclip to the end of the drawstring. Thread the end of the drawstring through the paperclip so that it's snug. Now, locate the eyelets—the circular openings where your drawstring comes out—and push the paperclip into one of them. Work the paperclip through the hoodie fabric by scrunching the fabric casing towards the paperclip, bunching it up. Hold the paperclip in place and pull the bunched-up fabric away with your other hand. Keep repeating this process, moving the paperclip through the fabric until it comes out of the other end of the fabric casing.

As you work the paperclip through the hoodie fabric, it's important to hold onto it securely so that it doesn't slip out of your grasp and get lost inside the casing. This process may take some time and patience, especially if your hoodie fabric is thick or the eyelets are small. Ensure that you don't tug or pull too forcefully, as this could cause the fabric to rip or tear.

Once the paperclip has emerged from the other side, carefully remove the drawstring from the paperclip. Now, pull on both ends of the drawstring to ensure they are of equal length. Finally, tie a large knot at each end of the drawstring to prevent it from slipping back into the casing. You can also add an aglet at the end, if desired.

Remove the paperclip from the drawstring

Once you have pushed the paperclip through the casing, you will need to remove it from the drawstring. To do this, simply unfasten the paperclip from the string. If you threaded the end of the drawstring through the paperclip, carefully undo the knot or untwist the paperclip to release the string.

If you used a large paperclip, you may find it easier to feel for it through the fabric. This can be helpful if you are working with a thick hoodie or a small eyelet hole. Once you can feel the paperclip through the fabric, pinch it and gently pull it out of the hole. Be careful not to poke or rip the fabric with the paperclip as you remove it.

After removing the paperclip, you may want to tie a knot at each end of the drawstring to prevent it from slipping back into the casing. Make sure the knots are larger than the eyelets. You can also add an aglet at the end of the drawstring for added security.

Now that the drawstring is secured, give it a gentle tug to ensure it is in place. Put on your hoodie and adjust the tightness of the string to your preference. With your hoodie looking as good as new, you can now confidently wear it and enjoy the comfort and style it provides.

Tie a knot at each end of the drawstring

Once you've pushed the paperclip and drawstring through the fabric, it's time to tie a knot at each end of the drawstring. This will prevent the drawstring from slipping back into the hoodie's casing. Make sure the knots are larger than the eyelets. You can also add an aglet at the end of the drawstring.

If you're using a safety pin instead of a paperclip, be sure to remove it before tying the knots.

If you're struggling to visualise this step, there are several YouTube tutorials that can help.

Frequently asked questions