Restring A Hoodie: Safety Pin Method

how to restring a hoodie with a safety pin

Losing the drawstring from your hoodie can be frustrating, but it's a common issue with an easy fix. You can use a safety pin to guide the string through the hoodie, preventing it from getting lost or tangled inside the fabric. This method is simple and effective, allowing you to quickly restore your hoodie to its former glory.

Characteristics Values
Number of tools required 1
Name of the tool Safety pin
Purpose of the tool Acts as a guide to help navigate the drawstring through the hoodie
Steps to restring 1. Attach the drawstring to the safety pin. 2. Insert the safety pin into the hoodie. 3. Thread the drawstring. 4. Remove the safety pin and adjust the drawstring.

shunvogue

Attach the safety pin to the drawstring

To restring a hoodie with a safety pin, start by attaching the safety pin to one end of the drawstring. This is a crucial step as the safety pin will act as a guide, helping you navigate the drawstring through the fabric tunnel of the hood without it getting lost or twisted halfway.

Firstly, ensure that the hoodie is washed before beginning this process. This ensures that no dirt gets carried and stuck in the hole of the hoodie. It is also best to work on the hoodie while it is not being worn, making it easier to move the safety pin through.

Now, onto attaching the safety pin. Take the safety pin and insert the sharp end through the tip of the drawstring. Try to get as close to the edge of the string as possible. If the drawstring has a metal or plastic aglet, insert the pin just below that. Then, close the pin. Ensure that the safety pin is attached securely to the drawstring, about 1/2 inch (1.3 cm) from the end, so that it doesn't come off inside the hood.

Once the safety pin is attached, you can move on to the next step of inserting the safety pin into the hoodie's eyelet.

shunvogue

Insert the safety pin into the hoodie

Now that you have your safety pin attached to the end of your hoodie string, it's time to insert the pin into the hoodie. This is how you do it:

First, locate the eyelets, the circular openings where your drawstring comes out. Push the safety pin into one of the eyelets. You may need to pinch the fabric to help the safety pin move through the hoodie. Straighten out the fabric while holding the safety pin. You may need to scrunch the fabric over the safety pin to help it move through the hoodie.

Keep pushing the safety pin along the length of the hood, through the fabric tunnel, until it comes out at the other end. Be careful not to let the string get twisted within. You may need to continue pinching and straightening the fabric while holding the safety pin to move the string through the hoodie. Do this until the safety pin reaches the hole on the other side of the hoodie.

shunvogue

Thread the drawstring

Threading a drawstring with a safety pin is a simple process that can be done in a few steps.

Firstly, pull out the drawstring from the hoodie. If your drawstring is stuck halfway, pull it out completely. This makes it easier to re-insert the drawstring. Next, attach the safety pin to the end of the drawstring. Push the sharp end of the pin through the tip of the string. The closer the pin is to the edge of the string, the better. If your drawstring has a metal or plastic aglet, push the pin just below that. Now, insert the safety pin into the eyelet of the hoodie. The eyelets are the circular openings where the drawstring comes out. Push the pin through the fabric until it reaches the other eyelet.

At this point, you can hold the safety pin in place and scrunch the fabric over it. Bunch the fabric up towards the pin and then pull the bunched-up fabric away with your other hand. Keep repeating this process until the safety pin comes out of the other end of the fabric. Finally, remove the safety pin from the drawstring.

shunvogue

Remove the safety pin

Once you have pushed the safety pin through the fabric tunnel of the hood, you will need to remove it from the drawstring. This is the final step in restringing your hoodie.

To do this, simply unclip the safety pin from the drawstring. Be careful when handling the safety pin, as it can cause injury if handled incorrectly. Once the safety pin is removed, you can tie a large knot at the ends of the drawstring or add an aglet to prevent the string from slipping back into the fabric tunnel.

If you are restringing a hoodie with two drawstrings, make sure to remove the safety pin from the first drawstring before repeating the process with the second one. It is important to be careful and take your time when removing the safety pin to avoid any injuries or accidentally damaging the fabric of your hoodie.

Now that your hoodie is restrung, you can wear it confidently without worrying about uneven or missing strings.

shunvogue

Adjust the drawstring

Once you have threaded the safety pin and drawstring through the hoodie, it's time to adjust the drawstring. Pull the drawstring through until both ends are of equal length. Then, untie the safety pin from the drawstring. If you want to prevent the string from slipping back into the hoodie, you can tie a large knot at the ends or add an aglet.

If you want to be extra careful, you can tie a knot at each end of the drawstring. This will ensure that the string doesn't slip out again in the future. It is also important to note that the process of re-stringing a hoodie can be challenging, especially if it is your first time. Therefore, it is recommended to choose a larger safety pin as it is easier to grip and push along the fabric. Additionally, if the drawstring keeps twisting inside the tunnel, make sure to straighten it out before threading it further.

Frequently asked questions

You will need a safety pin and the hoodie's drawstring.

Insert the sharp end of the pin through the tip of the string. Try to get it as close to the edge of the string as possible.

Insert the safety pin into one of the eyelets of the hoodie. Then, pinch and straighten the fabric while holding the safety pin, and continue doing this until the safety pin comes out of the other side.

Pull the string until both ends are of equal length. Then, remove the safety pin and tie a large knot at the ends or add an aglet to prevent the string from slipping back into the hoodie.

Yes, be careful when handling the safety pin as it can cause injury if handled incorrectly. It is also recommended to wash the hoodie and drawstring before beginning this process to ensure that no dirt gets stuck in the eyelet of the hoodie.

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment