Retreading A Hoodie Cord: Diy Guide

how to rethread a hoodie cord

Losing the drawstring from your hoodie can be frustrating, but there are several quick and easy ways to rethread it. One popular method involves using a straw and a stapler. First, remove the string from your hoodie. Then, thread one end of the drawstring through the straw and staple it in place. Next, push the straw through the hole in your hood and keep threading until it comes out the other end. Remove the staple and the straw, and you're done!

If you don't have a stapler, there are other methods you can try. Some people suggest using a safety pin, paper clip, or even a coat hanger to guide the drawstring back through the casing. You can also try using a pen cap or a knitting needle. Whichever method you choose, the key is to have something that is easy to grip and manoeuvre through the fabric.

Characteristics Values
Time taken Less than 60 seconds
Tools required Straw, stapler, safety pin, paperclip, coat hanger, pen cap, bodkin, wire, knitting needle, chopstick, duct tape, bobby pin, hair pin, crochet hook, yarn hook, knitting needle, large magnet

shunvogue

Using a safety pin

Firstly, make sure you have washed your hoodie and the string before beginning this process. This will ensure that no dirt gets stuck in the hole of the hoodie while you are working. It is also recommended to work on a flat surface and to not wear the hoodie during the process, as it will be easier to move the safety pin through.

Now, let's get started:

  • Remove the string from the hoodie if it is not already out.
  • Attach a safety pin to one end of the string. Make sure the pin is large enough to be felt through the fabric and easy to push along.
  • Insert the end of the string with the safety pin into one of the holes of the hoodie. You might need to pinch the fabric to help guide the safety pin through.
  • Straighten out the fabric and continue to pinch and straighten it as you move the safety pin through the hoodie.
  • Keep going until the safety pin reaches the hole on the other side of the hoodie. You might need to be patient and careful during this process.
  • Pull the end of the string with the safety pin out of the hole completely.
  • Remove the safety pin from the string, and you're done!

Your hoodie cord is now rethreaded, and you can wear your favourite hoodie with even strings again! This method might take a little longer than some other methods, but it is a tried and tested technique that many people have found success with.

shunvogue

Using a straw and a stapler

If the drawstring on your hoodie has disappeared into the hood, don't panic! You can easily rethread it using a straw and a stapler. Here's how:

First, completely remove the string from your hoodie. Then, take a straw and thread one end of the drawstring through it, pushing it in about an inch or two. Make sure you use a plastic straw, not a metal or rigid reusable one. Next, you'll want to secure the string in place. Do this by stapling through the soft cotton thread, not the aglet (the plastic or metal tip at the end of the string).

Now, guide the straw into one of the eyelets of the hood. Gently push it through the fabric tunnel, gathering and smoothing the fabric as you go. Keep going until the straw reaches the opposite eyelet and comes out the other side. Be careful to pinch the straw as you go, so that the drawstring doesn't slip out. If you're having trouble, you can add another staple to keep the drawstring in place.

Once the straw is through to the other side, carefully remove the staple(s) and pull the straw out. You can now remove the straw and tie a knot at each end of the drawstring to prevent this from happening again. And that's it! Your hoodie is as good as new.

shunvogue

Using a wire coat hanger

If you've lost the cord from your hoodie, don't worry—it's easy to rethread using a wire coat hanger. First, untwist the coat hanger so that it is one long wire. Next, take your hoodie cord and tape one end to the end of the coat hanger. Now, stick the end of the hanger through one of the holes in the hood that used to hold the cord in place. You may need to scrunch up the fabric or slide the hanger through, whichever works best for you. Once the hanger is out the other side, the cord should be back in place. All that's left to do now is to double knot the ends of the cord so that it doesn't come out again.

shunvogue

Using a pen cap

If you've lost the drawstring on your hoodie, don't panic! Here's a simple method using a pen cap to rethread it in no time.

First, locate the end of the drawstring that has come out of the hoodie. If it's still stuck inside the casing, carefully pull it out completely. Now, look for a pen with a pocket clip, which will be essential for this process. Take the exposed end of the drawstring and wrap it around the pocket clip of the pen securely. Make sure the pen doesn't have an exposed tip that could damage the fabric.

With the drawstring attached to the pen, carefully slide the opposite end of the pen into the casing of your hoodie. You might need to feel for the eyelets or circular openings where the drawstring originally came out. Gently push the pen through the fabric, guiding it along the casing. Keep going until the pen and the attached drawstring come out of the other end of the casing.

Once you've successfully guided the pen and drawstring through, carefully remove the drawstring from the pen's pocket clip. Now, pull on both ends of the drawstring to ensure they are of equal length. Finally, tie a large knot at each end of the drawstring to prevent it from slipping back into the casing. And that's it! Your hoodie is as good as new, with its drawstring securely in place.

This method is a quick and easy solution to the common problem of a lost drawstring. No more struggling with safety pins or other complicated tools—just grab a pen and get your hoodie back in shape!

shunvogue

Using a bodkin

Step 1: Prepare the Drawstring and Bodkin

Firstly, push about four inches of the drawstring through the hole at the end of the bodkin. If your bodkin has a clamp instead of a hole, open it, place the end of the drawstring under the clamp, and close it securely.

Step 2: Insert the Bodkin into the Hoodie

Now, insert the bodkin, with the attached drawstring, into one end of the hoodie's tunnel. Gently push the bodkin and drawstring along the fabric tunnel, being careful not to twist the drawstring.

Step 3: Thread the Drawstring

Continue pushing the bodkin along the length of the hoodie's tunnel until it emerges at the other end. Ensure that the other end of the drawstring does not slip into the tunnel as you work.

Step 4: Remove the Bodkin and Adjust the Drawstring

Once the bodkin comes out of the other end, carefully remove the drawstring from it. Then, pull on both ends of the drawstring until they are of equal length.

Step 5: Secure the Drawstring (Optional)

Finally, you can secure the drawstring by tying a knot at each end. This will prevent the string from slipping back into the fabric tunnel.

And that's it! Your hoodie cord has been successfully rethreaded using a bodkin. Remember, patience is key when rethreading a hoodie cord. Take your time and work carefully to avoid any damage to your hoodie's fabric.

Frequently asked questions

You can use a safety pin, a straw and a stapler, a wire coat hanger, or a pen with a pocket clip.

Using a straw and a stapler is a quick and easy method. First, thread one end of the cord through the straw and staple it in place. Then, push the straw through the hoodie and keep threading until it comes out the other end. Remove the staple and straw, and you're done.

Secure a large safety pin to one end of the cord and push it through the eyelet of your hoodie. Work the safety pin through the fabric until it comes out the other side, then remove the safety pin and adjust the cord to the desired length.

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment