Retreading Hoodie Strings: A Quick Guide

how to rethread a hoodie string

There's nothing more frustrating than discovering that your hoodie drawstring has vanished into the depths of its hood. But fear not, there are several simple methods to rethread your hoodie string and get it back to its former glory. From safety pins to paper clips, coat hangers to knitting needles, there are plenty of household items that can help you solve this common problem. One particularly innovative method involves using a straw and a stapler, while another suggests freezing the string to make it easier to work with. Whatever your tool of choice, it's a quick and easy fix to an issue that affects many hoodie owners.

How to rethread a hoodie string

Characteristics Values
Step 1 Remove the string from the hoodie
Step 2 Use a safety pin, a pen, a straw, a paper clip, a magnet, a crochet, yarn or knitting hook, a chopstick, a wire coat hanger, a knitting needle, electrical snake, a bamboo skewer, or a piece of wire to help rethread the string
Step 3 Attach the chosen tool to one end of the string and feed it through the hoodie
Step 4 Remove the tool from the string once it reaches the other side


Using a safety pin to guide the string

Firstly, you need to remove the string from the hoodie if it is not already out. Then, attach a safety pin to one end of the string. It is important to use a large safety pin that can be easily handled and fed through the hoodie. Ensure that the safety pin is attached securely and is small enough to fit through the hoodie's eyelets or openings.

Next, locate the eyelets or openings on the hoodie, which are usually found on each side of the hood. Insert the safety pin and the end of the string into one of these eyelets. Once it is inside, use your fingers to pinch and straighten the fabric, helping to guide the safety pin and string through the hoodie.

Continue to inch the string through the hoodie, pulling it slowly until the safety pin reaches the other end. You can do this by holding the safety pin in place with one hand and using your other hand to gently pull and scrunch the fabric towards the pin, creating a bunch. Then, hold the bunched fabric in place and pull the safety pin away from it, moving it through the hoodie. Repeat this process until the safety pin and string come out of the other side.

Finally, remove the safety pin from the string, and your hoodie should now be rethreaded! You can then tie a large knot at each end of the string to prevent it from slipping back into the hoodie.

The Cost of TGF Hoodies: What to Expect

You may want to see also


The straw and stapler method

Firstly, completely remove the string from your hoodie. Then, take a plastic straw and insert one end of the drawstring into it, pushing it in about one inch. Next, staple the drawstring to the straw to prevent it from slipping out while you are threading. Now, feed the straw through the eyelet and gently push it through the fabric tunnel until it reaches the opposite eyelet. Once it is through, carefully remove the staple and straw. Finally, tie a knot at each end of the drawstring to prevent the string from slipping back into the casing.


A magnet to help guide the string

A magnet can be a handy tool to help guide the string back into the hoodie's drawstring tunnel. This method is especially useful if you're struggling to grip the string or need some extra help navigating it through the fabric. Here's a step-by-step guide on how to use a magnet to rethread your hoodie string:

Step 1: Gather Your Materials

First, make sure you have everything you need. You'll require the following items:

  • Your hoodie
  • The drawstring
  • A strong magnet
  • A thin, long tool to guide the string (e.g., a safety pin, wire hanger, or chopstick)

Step 2: Prepare the Drawstring

Completely remove the drawstring from your hoodie. This step might seem counterintuitive, but it will make the rethreading process easier. Once removed, set the drawstring aside.

Step 3: Attach the Magnet

Take the thin, long tool you've chosen and attach the magnet securely to one end. You can use tape or a small piece of wire for this. Ensure that the magnet is firmly attached and won't detach inside the hoodie.

Step 4: Connect the Drawstring

Attach one end of the drawstring to the magnet. Make sure the connection is secure and won't come loose as you guide it through the hoodie.

Step 5: Start Rethreading

Insert the tool with the attached magnet and drawstring into the drawstring tunnel at one end of the hoodie. Gently push it through, being careful not to twist or knot the drawstring inside the tunnel.

Step 6: Guide with the Magnet

As you push the tool through, use the magnet to guide the drawstring along. The magnet's attraction to metal objects can help navigate the string through the tunnel, especially if you're having trouble reaching certain sections.

Step 7: Complete the Rethreading

Continue pushing the tool and guiding the drawstring with the magnet until the tool emerges from the other end of the tunnel. Ensure that both ends of the drawstring are of equal length.

Step 8: Final Adjustments

Once the drawstring is successfully rethreaded, remove the tool and adjust the drawstring as needed. You can tie a knot at each end of the drawstring to secure it and prevent future slip-outs.

Using a magnet to guide the string can be a creative and effective solution when rethreading a hoodie. It may take some patience and experimentation, but with these steps, you'll be well on your way to restoring your favourite hoodie to its former glory!


Using a metal coat hanger

If you've lost the string from your hoodie, a metal coat hanger can be used to rethread it. Here's a step-by-step guide:

Firstly, you need to prepare the coat hanger. Untwist it so that it becomes one long wire. This process will likely leave you with a sharp edge, so be careful when handling the hanger. Next, take your hoodie string and tape one end of it to an end of the coat hanger.

Now, you're ready to start rethreading. Find one of the holes that held the string in the hood and stick the end of the hanger through it. You might need to scrunch up the fabric or slide the hanger through, working with the shape of your hoodie to find the best path. Keep manoeuvring the hanger until it comes out of the other hole.

Once the hanger has made its way through, the string should be back in place. All that's left to do now is to remove the tape and double knot the ends of the string to prevent this from happening again.

There are other methods to rethread a hoodie string, such as using a safety pin or a paper clip, but a metal coat hanger provides stiffness and ease of manoeuvrability, making it a popular choice.

Easy Ways to Loosen a Hoodie's Fit

You may want to see also


Freezing the string

Firstly, completely remove the string from your hoodie. This step is crucial as it ensures that you can start the rethreading process with ease. Once the string is removed, soak it in water. This step is important because it will help the string become stiffer when frozen, making it easier to push through the hoodie's casing. After soaking the string, place it in the freezer and wait for it to freeze solid. This may take a few hours, so plan accordingly.

While you wait for the string to freeze, you can prepare the hoodie. Make sure the casing, or the tube around the edge of the hood, is clear of any obstructions. You can use a thin wire or a safety pin to check for any knots or tangles that may hinder the rethreading process. It is important to ensure a smooth path for the frozen string.

Once the string is frozen, you are ready to begin rethreading. Attach something rigid to the end of the string, such as a safety pin, a paper clip, or a small knot. This will make it easier to guide the string through the casing. Start by inserting the rigid end into the hole of the casing and gently push it through. You may need to twist and turn the string as you guide it through the tube. Take your time and be gentle to avoid damaging the fabric.

As you push the frozen string through, be mindful of any bends or curves in the casing. Use a gentle back-and-forth motion to navigate through these areas. If you encounter resistance, carefully wiggle the string back and forth to find the path of least resistance. Continue guiding the string through the casing until it emerges out the other end.

Finally, remove the safety pin, paper clip, or knot from the end of the string. Tie a secure knot at each end of the string to ensure it doesn't slip back into the hoodie. And that's it! You have successfully rethreaded your hoodie string using the freezing method.

The freezing method is an effective way to rethread a hoodie string, and it may be less cumbersome than other methods. It is a straightforward process that requires some preparation time and a bit of patience. By following these steps, you can easily restore your hoodie's functionality and get back to enjoying its comfort and style.

Frequently asked questions

One method involves using a safety pin. First, remove the string from the hoodie. Then, attach the safety pin to one end of the string and insert it into one of the holes in the hoodie. Pinch the fabric to help guide the safety pin through the hoodie. Continue this process until the safety pin comes out of the other hole. Finally, remove the safety pin from the string.

Yes, there are several alternative methods. One involves using a straw and a stapler. First, remove the string from the hoodie, then thread one end of the string through the straw and staple it in place. Push the straw through the hole in the hood until it comes out of the other end. Remove the staple and straw, and you're done.

Other tools that can be used include a metal coat hanger, a knitting needle, a chopstick, a bamboo skewer, a paper clip, a bobby pin, or a pen.

It is recommended to wash the hoodie and the string before beginning the repair to ensure that no dirt gets stuck in the hole of the hoodie. It is also best to work on the hoodie when you are not wearing it, as this will make it easier to move the tool through the hoodie.

After rethreading the hoodie, you can put a couple of stitches at the top of the hood to secure the string in place.

Written by
Reviewed by
Share this post
Did this article help you?

Leave a comment