Revamp Your Old Hoodie: A Simple Guide

how to rstring hoodie

Losing the drawstring from your hoodie can be frustrating, but there are several quick and easy ways to replace it. Whether you want to refresh your hoodie with a new colour or material, or simply put a rogue drawstring back in place, you can do so with just a few household items.

Characteristics Values
Items required Straw, stapler, safety pin
Step 1 Remove the string from the hoodie
Step 2 Thread the string through the straw
Step 3 Staple the string to the straw
Step 4 Thread the straw through the eyelets of the hood
Step 5 Remove the staple and straw

shunvogue

Using a straw and a stapler

Firstly, take a plastic straw, and insert one end of the drawstring into it. Ensure that you push the string through by about half an inch beyond the aglet (the plastic or metal covering at the end of the lace). Then, staple through the soft cotton thread, avoiding the aglet.

Next, feed the straw through one of the eyelets of the hood, and gently push it through the fabric tunnel. Smooth and gather the fabric as you go, until the straw reaches the opposite eyelet. Once the straw is through, gently remove the staple from the drawstring.

Finally, to prevent the drawstring from coming out again, you can tie a knot at each end. And that's it! Your hoodie is now restrung, without the need for a safety pin or any complicated detangling.

This method is a quick and easy way to solve the common issue of a loose hood drawstring. It is a simple fix that only requires a few household items and can even allow you to get creative and replace your drawstring with a different colour or material.

shunvogue

Using a safety pin

Firstly, it is recommended that you wash your hoodie and string before beginning. This will ensure that no dirt gets stuck in the eyelet of the hoodie. It is also best to work with the hoodie laid out flat, rather than wearing it, as this will make it easier to move the safety pin through the hoodie.

Now, take the safety pin and attach it to one end of the string. Insert the sharp end of the pin through the tip of the string, as close to the edge as possible. If your drawstring has a metal or plastic aglet, insert the pin just below this. Then, close the safety pin, securing the string inside.

Next, insert the safety pin and string into one of the eyelets of the hoodie. Pinch and straighten the fabric to help guide the safety pin through the hoodie. Continue this process, moving the safety pin and string through the hoodie towards the other side.

Once the safety pin and string have reached the other side, pull them out of the eyelet. Then, open the safety pin and remove it from the string. Finally, tie the ends of the string together to prevent it from coming loose again.

And that's it! Your hoodie is now restrung, and you can wear it without fear of uneven or missing strings.

shunvogue

Removing the string from the hoodie

Removing the string from your hoodie is the first step in restringing it. This is a simple process, but it requires care to avoid injury. Firstly, it is recommended that you wash your hoodie before beginning this process to ensure no dirt gets stuck in the eyelets of the hood.

To start, completely remove the string from your hoodie. You can do this by pulling the string out of the eyelets of the hood. Once the string is removed, you can decide whether to replace it with a new drawstring or restring the existing one. If you opt to replace it, consider choosing a different colour or material to give your hoodie a unique look.

If you're removing the string because it has become tangled or knotted, you might want to use a safety pin to help you untangle it before attempting to restring it. Be cautious when handling the safety pin, as it can cause injury if not handled correctly.

Now, let's move on to the restringing process, which will be covered in the next paragraphs.

shunvogue

Threading the string

Firstly, you will need to gather your tools. For this method, you will need a plastic straw and a stapler. You will also need a new drawstring, which can be purchased from online retailers like Amazon.

Now, take the drawstring and insert one end of it into the straw. You will want to thread the string through the straw, pushing it through to the other end if possible. If you can't get it all the way through, don't worry, just make sure it's a few inches in. You can use a chopstick to help push the string through the straw if needed. Once the string is in the straw, staple it in place, being careful to staple through the soft cotton thread and not the aglet (the plastic or metal that covers the end of the laces).

Now, take your hoodie. Guide the straw into one of the eyelets of the hood and hold it in place. You may need to pinch the fabric to help guide the straw through. Continue to thread the straw through the fabric tunnel until it comes out the other eyelet. As you do this, be sure to pinch the straw so that the drawstring doesn't come out.

Once the straw has been threaded all the way through the hoodie, you can remove the staple and then gently pull the straw out, leaving the new drawstring in place.

shunvogue

Securing the drawstring

To secure the drawstring, you can tie the ends of the drawstring together or tie each end into a knot. This will prevent the drawstring from becoming loose in the future. You can also cut off any excess string.

If you are restringing the hoodie, it is recommended to wash the hoodie and the string before beginning. This ensures that no dirt gets stuck in the hole of the hoodie. It is also easier to restring a hoodie that is not being worn, so it is best to work on a flat surface.

When restringing, it is important to be careful when using safety pins, as they can cause injury if handled incorrectly. Alternatively, you can use a plastic straw and a stapler to restring the hoodie. First, thread the drawstring into the straw, and staple the string to the straw. Then, push the straw through the eyelet of the hood, and pinch the straw to prevent the drawstring from slipping out. Once the straw is through to the other eyelet, remove the staple and the straw, and you're done!

Frequently asked questions

You can restring a hoodie using a safety pin, a straw and a stapler, or a chopstick.

First, remove the string from the hoodie. Then, pin a safety pin to one end of the string and insert it into one of the holes of the hoodie. Pinch the fabric to help the safety pin move through the hoodie and straighten out the fabric while holding the safety pin. Continue this process until the safety pin reaches the hole on the other side of the hoodie. Then, pull the string with the safety pin out of the hole and remove the safety pin from the string.

First, thread the drawstring into the straw and staple it in place. Then, push the straw through the eyelet of the hood and guide it through the fabric tunnel until it comes out of the other eyelet. Finally, remove the staple and the straw.

You can use a stapler to help keep the drawstring inside the straw. Place the stapler across the width of the straw and press down to pinch the straw and the string in place.

It is recommended to wash the hoodie and the string before restringing. This ensures that no dirt gets stuck in the hole of the hoodie. It is also easier to restring the hoodie when it is not being worn.

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment