Preventing Cut T-Shirts From Rolling: Easy Tricks To Try

If you've cut the bottom off a T-shirt and want to stop it from rolling up, there are several things you can try. One option is to cut the shirt a little longer than you want it and then hem it with a zigzag stitch. Alternatively, you can try using hair straighteners or a regular iron to flatten the material. Taking the T-shirt out of the dryer while it's still warm and laying it flat to air dry with the hem flattened out may also help.

Characteristics of preventing a cut T-shirt from rolling

Cut the t-shirt longer than desired and hem with a zigzag stitch

If you want to prevent the bottom of your T-shirt from rolling up after cutting it, try cutting the T-shirt longer than your desired length and then hem it with a zigzag stitch. This method will prevent the T-shirt from curling up at the bottom. You can do this by hand, but it will be hemmed.

Cutting the T-shirt longer than you want it to be is a simple yet effective way to prevent the fabric from rolling. The knitted fabric of the T-shirt will naturally curl, but by cutting it longer and then hemming with a zigzag stitch, you can control the final length and achieve a neat finish.

Hemming the shirt with a zigzag stitch will secure the raw edge of the fabric and prevent it from rolling. This stitch is flexible and allows for movement, ensuring that the hem will not break or pucker when the shirt is worn or washed. It also blends well with the stretch of the fabric, creating a seamless finish.

Additionally, by cutting the shirt longer than desired, you can compensate for any potential shrinkage that may occur during washing and drying. This will ensure that even after multiple washes, the shirt will maintain its desired length and fit.

Overall, cutting the T-shirt longer than desired and hemming with a zigzag stitch is a straightforward solution to prevent the fabric from rolling. It provides a secure and flexible finish, accommodating the natural stretch of the fabric while also allowing for any potential shrinkage. This method is a great way to customise your T-shirt and ensure it stays in place.

Spray with starch and iron

To stop a cut T-shirt from rolling, one method you can try is to spray the shirt with starch and iron it. Starch can be found in the laundry detergent aisle. Simply spray the starch onto the shirt, and then use an iron to go over the cut edges of the shirt. This should help to keep the fabric from rolling.

If you don't have access to starch, you could also try using an iron-on fusible bonding tape. This can be found in most craft stores and is designed to create a strong bond between two fabrics when heated. Simply cut the tape to the desired length, place it along the cut edge of your T-shirt, and then use a hot iron to activate the adhesive.

Another option is to use a fabric adhesive, such as a fabric glue or a fusible web adhesive. These adhesives are designed to create a strong bond between fabrics without the need for stitching. Simply apply the adhesive along the cut edge of your T-shirt and then use your hands to firmly press the fabric together.

It is worth noting that while these methods can help to prevent fabric rolling, they may not completely eliminate it. The knit structure of the T-shirt fabric will always want to curl, so a combination of these methods may be the most effective approach.

Additionally, when using any of these methods, it is important to work on a flat surface and ensure that your iron is set to the appropriate temperature for the fabric type. Always test on a small area first to avoid any damage to your garment.

Apply fusible bonding to the inside before cutting

If you want to stop a cut T-shirt from rolling, consider applying fusible bonding to the inside before cutting. This method can work miracles and prevent the shirt from rolling up.

Fusible bonding is a quick and easy way to bond two pieces of fabric together without the need for sewing. It is a temporary bond that can be created using fusible fabric or fusible bonding tape. The process involves placing the fusible fabric or tape adhesive-side down on top of your project and then applying heat with an iron or a Cricut EasyPress.

Before beginning, always pretest the fusible fabric or tape on a piece of scrap material to ensure it will work with your chosen fabric. Cut a piece of the fusible fabric or tape slightly larger than the area you wish to bond. Place it adhesive-side down on your T-shirt, in the area you plan to cut. Using an iron on medium to high heat with no steam, press and hold for 20 seconds. Repeat this process, working in sections, until the entire piece is securely bonded.

If using a Cricut EasyPress, set the temperature and time based on your chosen pressing surface. Preheat the design area for 5 seconds, then press and hold for 30 seconds in sections until the entire piece is bonded. Finally, apply heat to the backside of the design area for 15 seconds.

While fusible bonding provides a temporary bond, it is important to note that it will not withstand washing. To permanently secure the shape, you should stitch around the bonded area.

Cut the shirt inside out to make it roll inwards

If you want to cut your T-shirt and prevent it from rolling outwards, try cutting the shirt while it's inside out. This will help the fabric roll inwards, which is less noticeable.

To cut a T-shirt properly, you'll need a pair of very sharp scissors. You can use hair-cutting scissors or fabric scissors to make sure each cut is precise and goes all the way through the fabric. You can also use a pen or washable chalk to mark the cutting lines on your shirt. This will help you cut in a straight line and ensure your cuts are even.

Before cutting, lay your shirt on a flat surface with the front facing up. If you're cutting the bottom hem, measure out where you want the new hem to hit and use a pen to mark on each side so you know you're cutting it straight. Then, start cutting on one side, making sure you're aligned with your other mark. Stretch out the new hem with your fingers to give it a more worn-in look.

If you're cutting the sleeves, decide whether you want to cut the seams out or leave them in. Leaving the seams intact will prevent your shirt from unravelling or looking shabby, and it will also create a smaller armhole. Cutting out the seams with the sleeves will give a more casual, halter-top look and a larger armhole, which can make the shirt more comfortable.

Once you've decided on your cutting strategy, mark your desired cut on the shirt. If you're cutting out the seam, mark a line about 1 inch (2.5 cm) in from the seam with chalk or an erasable pen. Curve the line around the seam so that it ends at a right angle about 1 inch (2.5 cm) under the sleeve. To keep the seam, make your line about 1/4 inch (0.64 cm) from the outside of the seam.

After marking your cut, hold the fabric taut and carefully cut along the marked lines. Cut as smoothly as you can without stopping to make your cuts clean. Repeat the process for the other sleeve, or fold the shirt in half before cutting to ensure an even cut on both sides.

Finally, if you want to prevent the cut edges from curling or fraying, you can hem them by folding the edge of the fabric about 1/4 inch (0.64 cm) inside the shirt and pinning it down. Then, sew two straight lines next to each other around the ends of the sleeves to attach the hem. You can do this by hand or with a sewing machine.

Use a hair straightener to flatten the hem

If you want to stop a cut T-shirt from rolling, using a hair straightener to flatten the hem is an effective method. Hair straighteners are a convenient alternative to a traditional iron and ironing board, especially for small jobs like flattening a T-shirt hem.

Before using your hair straightener on your T-shirt, make sure it is clean and dry. Hair products can build up in the grooves of the plates, so give the straightener a wipe down with a damp towel to avoid getting any residue on your clothes. You can also use a styling iron cleaner to clean the plates while the straightener is cool.

Once your straightener is ready, simply clamp it around the flattened hem of your T-shirt to tame it into position. You can also use this method on shirt collars, sleeves, or wrinkled button plackets. If your hair straightener has adjustable temperature settings, be sure to use a low heat setting for T-shirts, as you would with other durable fabrics.

Using a hair straightener is a quick and easy way to flatten a rolled-up T-shirt hem, and it can be done as part of your morning routine without the hassle of setting up an ironing board.

Frequently asked questions