I Am Gia Pixie Coat Care: A Guide To Proper Washing

The I.AM.GIA Pixie Coat is a stylish, oversized teddy bear jacket made from soft sherling-like fabric. To keep it in good condition, it is recommended that you hand wash the coat or use a gentle machine wash. Do not tumble dry, bleach, or iron the coat, and be sure to dry it flat.

Washing instructions

The I.AM.GIA Pixie Coat is made from heavyweight sherpa fabric and should be handled with care when washing. The coat can be hand-washed or gently machine washed in warm water. Avoid using bleach and do not tumble dry. To dry, it is recommended to lay the coat on a flat surface. If you need to iron the coat, it is best to use a warm iron.

When hand-washing, gently submerge the coat in warm water with a mild detergent. Avoid rubbing or wringing the fabric, as this may damage the fibres and affect the shape of the coat. Instead, gently agitate the water with your hands to clean the coat. Rinse thoroughly in warm water to remove any residual detergent.

If using a washing machine, place the coat in a mesh laundry bag to protect it from snagging on other items or the sides of the machine. Select a gentle cycle with warm water and a slow spin speed. Use a mild detergent and avoid fabric softeners, as these may affect the coat's texture.

After washing, gently squeeze the excess water from the coat. Do not wring or twist the fabric. To dry, lay the coat flat on a towel and reshape it as needed. Allow it to air dry completely before storing or wearing.

It is important to follow these instructions carefully to maintain the coat's shape, texture, and colour. Always refer to the care label on your coat for specific instructions, as they may vary depending on the fabric and style.

Drying the coat

To dry the I.AM.GIA Pixie Coat, it is recommended that you do not tumble dry it. Instead, you should dry it flat. This is because tumble drying may damage the coat's fabric and structure.

After hand washing or machine washing the coat gently, squeeze out any excess water from the coat. Be careful not to wring or twist the fabric, as this may cause it to stretch or become misshapen. Instead, gently press the coat between your hands or a towel to remove the water.

Lay the coat flat on a drying rack or a clean, dry towel. Ensure that the coat is smoothed out and not folded or bunched up, as this can cause creases to form. If possible, lay the coat on a drying rack with a mesh surface, which will allow air to circulate more effectively and speed up the drying process.

Place the coat in a well-ventilated area, preferably in a warm, sunny spot, to help speed up drying. You can also place a fan near the coat to improve air circulation and reduce drying time.

If the coat has a warped or wavy zipper, avoid drying it in a way that may exacerbate this issue. Ensure the zipper is fully closed to maintain the coat's shape during the drying process.

Depending on the temperature and humidity, the coat should be completely dry within 24 to 48 hours. Once the coat is dry, you can gently brush the fabric with a clothing brush to restore its soft texture and remove any remaining loose fibres.

Vacuum cleaning to reduce shedding

The I.AM.GIA Pixie Coat is a popular choice for many, but it has been noted that the coat sheds a lot. Vacuum cleaning is an effective way to reduce shedding and can be done by following these steps:

Firstly, it is important to use the correct vacuum attachment. The upholstery attachment is ideal for this purpose as it is designed to be used on fabrics and will ensure that the coat is not damaged during the process.

Before vacuuming, it is recommended to lightly mist the coat with water. This will help to reduce shedding. When you are ready to vacuum, gently go over the coat with the vacuum, being careful not to apply too much pressure. Focus on areas that are more prone to shedding, such as the sleeves and cuffs, as well as areas that come into contact with other surfaces, like the back and shoulders.

Vacuuming your I.AM.GIA Pixie Coat regularly will help to remove loose fibres and reduce shedding. It is also important to store the coat properly when it is not in use. Hang the coat in a cool, dry place, away from direct sunlight and heat sources. Use a breathable garment bag to protect it from dust and prevent crushing the fibres.

In addition to vacuuming, there are other ways to minimise shedding. Brushing the coat with a soft-bristled brush in the direction of the nap will help to remove loose hair and prevent matting. You can also lightly mist the coat with water and then gently brush it to detangle and smooth the fibres.

By following these steps, you can effectively reduce the shedding of your I.AM.GIA Pixie Coat and keep it looking its best for years to come.

Water temperature

When washing the I Am Gia Pixie Coat, it is important to consider the water temperature. Hand washing or gentle machine washing with warm water is recommended. Warm water is ideal for removing dirt and stains without causing damage to the fabric. It is important to avoid using hot water, as it may cause the fabric to shrink or become misshapen. Additionally, warm water helps to maintain the colour and texture of the coat.

The Pixie Coat is made from heavyweight sherpa, which is a type of fabric that can handle warm water without losing its shape or softness. However, it is still important to follow the care instructions provided by the manufacturer to ensure the longevity of the coat.

For hand washing, fill a basin or sink with warm water and use a mild detergent. Submerge the coat and gently agitate the water with your hands to evenly distribute the detergent. Soak the coat for a few minutes, then gently squeeze and rinse it with warm water. Avoid twisting or wringing the fabric to remove excess water, as this can damage the fibres.

If using a washing machine, set it to a gentle cycle with warm water. Place the coat in the machine and add a mild detergent. Make sure that the machine is not overloaded, as this can cause the coat to stretch or become misshapen.

After washing, the coat should be dried flat and away from direct sunlight or heat sources. Warm ironing may be done if needed, but it is important to avoid tumble drying as it can damage the fabric.

Stain removal

The I.AM.GIA Pixie Coat is a popular jacket, but it is prone to shedding and can be difficult to zip up. Here are some tips for stain removal to keep your coat looking its best:

• As the coat is made from heavyweight sherpa fabric, it is prone to shedding, especially when new. To minimise this, use a vacuum cleaner with an upholstery attachment to gently remove any loose fibres and fluff.
• To remove stains, the care label advises a warm hand wash or gentle machine wash. Do not tumble dry the coat, as this may damage the fabric and cause further shedding. Instead, dry the coat flat and use a warm iron if needed.
• Be cautious when washing with other items, as the coat is available in light colours such as caramel and red, which may stain easily. Wash with similar colours to avoid any potential discolouration.
• Avoid using bleach or other harsh chemicals, as these may damage the fabric. Opt for a mild detergent instead.
• For more stubborn stains, you may need to spot treat the affected area before washing. Gently work a small amount of detergent or stain remover into the stain and allow it to sit for a few minutes before rinsing or washing as usual.
• Always follow the care instructions on the label and test any stain removal methods on a small, inconspicuous area of the coat first to avoid any potential damage.

Frequently asked questions