Creative Ways To Wrap A T-Shirt Box

how to wrap a t shirt box

Wrapping a T-shirt can be a tricky task, especially if you don't have a box. But don't worry, there are several ways to wrap a T-shirt, with or without a box, to create a neat and attractive gift. This guide will take you through the process step by step, offering tips and tricks to ensure your gift looks its best.

Characteristics Values
Place tissue paper and the folded shirt into a garment box Tape closed
Lay the box face-down on a large piece of gift wrap Cut the gift wrap to size
Pull the far end of the paper up and over the box Tape it down
Pull the front of the paper up to the edge Crease the paper
Cut any excess paper, but leave a 1-inch overhang Fold over the excess and tape it down
Fold down the top flap on one of the sides Cut off the excess
Tape down the top flap, then fold, cut, and tape down the bottom flap Repeat on the other side
Place the shirt on top of 2 sheets of tissue paper Wrap the sides of the tissue paper neatly around the shirt
Cut a sheet of wrapping paper long enough to wrap around the gift Place the shirt about 2 inches from the bottom of the paper
Wrap the paper around the gift side-to-side Tape it down
Fold the paper on the top and bottom of the package Tape it down

shunvogue

How to wrap a t-shirt box with tissue paper

Wrapping a t-shirt is quite simple and takes less time. If you don't have a box, you can use tissue paper and wrapping paper to create a smooth surface for your gift. Here's a step-by-step guide on how to wrap a t-shirt box with tissue paper:

Step 1: Prepare the T-shirt and Tissue Paper

Lay your t-shirt on top of 2-3 layers of tissue paper. If you're using multiple colours of tissue paper, try to fan them out so that each colour's corners are visible. This adds volume and creates a beautiful display. Make sure your t-shirt is folded neatly into a rectangle, with the sleeves and collar tucked in.

Step 2: Wrap the T-shirt in Tissue Paper

Wrap both sides of the tissue paper neatly around the t-shirt. First, fold in one side of the tissue paper, then do the same on the other side. Next, fold the bottom of the tissue paper up, and then fold the top of the paper down. This will create a neat square or rectangle that will be easier to wrap.

Step 3: Prepare the Wrapping Paper

Measure the width and length of your t-shirt, including the tissue paper. The wrapping paper should be slightly more than twice as wide as your package, but only about 4 inches (10 cm) longer than the height of the folded shirt. Cut the wrapping paper to size, making sure the printed side is facing down.

Step 4: Place the T-shirt on the Wrapping Paper

Place the tissue-wrapped t-shirt about 2 inches (5.1 cm) from the bottom of the wrapping paper. This will leave enough space to close the bottom of the package later.

Step 5: Wrap the Paper Around the T-shirt

Wrap the paper around the t-shirt and tape it down. Fold one side of the wrapping paper around the t-shirt to the opposite side, creating a small overhang. Fold and crease the excess paper, then tape it down. Repeat this process for the other side.

Step 6: Fold and Tape the Top and Bottom Flaps

Fold the paper on the top and bottom of the package and tape it down. Simply fold the paper towards the back of the present and secure it with tape.

Step 7: Add Decorative Embellishments (Optional)

Once your t-shirt is wrapped, you can add ribbons, bows, flowers, a name tag, or any other decorations you like. Get creative and make your gift stand out!

shunvogue

How to wrap a t-shirt box without tissue paper

If you don't have a box for the t-shirt, you can still wrap it. However, using only wrapping paper by itself might not make the most sturdy package, and any buttons, snaps, or pockets might cause the paper to wrinkle. Here is a step-by-step guide:

  • Prepare the t-shirt for wrapping: Lay the t-shirt upside down on a flat surface and fold in both sleeves. Then, grab the collar and fold it back so that it lines up with the hem of the shirt.
  • Add tissue paper for a smooth surface (optional) : If you want to avoid wrinkles in your wrapping paper, add a couple of pieces of tissue paper to your present, then fold the shirt neatly and place it on the tissue paper.
  • Cut the wrapping paper to size: The paper should be a little more than twice as wide as your package but only needs to be about 4 inches (10 cm) longer than the height of the folded shirt. That will leave enough to fold down the top and bottom flaps when you're finished. Cut the paper a little bigger than you think you need, then trim it later.
  • Place the shirt on the paper: Lay the wrapping paper face-down on your work surface. Then, place the shirt on top of the sheet, leaving just enough of an overhang that you can close the bottom of the package later.
  • Secure the wrapping paper: Fold one side of the wrapping paper all the way around the shirt to the opposite side. This should leave you with a small amount of overhang. Fold and crease the excess paper lengthwise, then tape down the flap you've just made.
  • Fold the top and bottom flaps: Once you've finished closing the sides, fold the top and bottom of the present towards the back of the gift, then tape them down.
  • Embellish as desired: Now that your shirt is wrapped, you can add ribbons, bows, flowers, a name tag, or anything else you'd like.

Tips:

  • It's always better to cut the paper bigger than you need it. You can always trim off the excess later, but you can't add more if you cut it too short.
  • A heavier wrapping paper is best for this type of present, as it's less likely to tear.
  • Avoid trying to write on the gift with an ink pen, as you might punch through the gift wrap and leave a hole in your present.

shunvogue

How to fold a t-shirt for a box

There are many ways to fold a t-shirt, and the best method depends on the type of shirt and the space you have available. Here is a simple method for folding a t-shirt to fit into a box:

Begin by laying the t-shirt flat on a table or another flat surface, preferably with the front side facing down. Smooth out any wrinkles and make sure the sleeves are not bunched up.

Next, fold the t-shirt into thirds from left to right, bringing the sleeves into the centre. If the sleeves are long, fold them back over the shirt so they form triangles lying flat on top of the shirt.

Then, fold the shirt in half from the bottom up, bringing the hem to meet the collar. At this point, the shirt should resemble a short rectangle with the sleeves tucked inside.

Finally, repeat the previous step by folding the shirt in half again. This will reduce the shirt to a small square that can easily fit into a box. If the shirt has a design on it, this final fold will bring the image back to the top.

This folding method can be adjusted to fit different sizes of boxes. For a larger box, you can skip the final fold to keep the shirt in a rectangular shape. For a smaller box, you can fold the shirt into thirds vertically before beginning the steps above.

Additionally, there are other methods for folding t-shirts that may be better suited to your needs. For example, the "file fold" method allows you to stack shirts vertically in a drawer, while the "square fold" method produces a larger square that showcases any logos or designs on the shirt.

shunvogue

How to tape a t-shirt box

Taping a T-shirt box is a simple process. First, you will need to gather your materials: a T-shirt box, wrapping paper, scissors, and tape. If you don't already have a T-shirt box, you can purchase one from a party supply store or a big-box store. Alternatively, you can use a garment box or a shirt box that you may have received when purchasing clothing from a department store or a shop that offers gift-wrapping.

Once you have your box, lay two pieces of tissue paper at the bottom of the box. Then, neatly fold your T-shirt and place it on top of the tissue paper. You can add another sheet of tissue paper on top of the shirt, if desired. Place the top of the box on and tape it closed with two small pieces of tape.

Now, it's time to start wrapping! Lay the box face-down on a large piece of wrapping paper. Unroll the wrapping paper until you have enough to wrap all the way around the box, then use scissors to cut the paper to size. Pull the far end of the paper up and over the box, and tape it down on the top edge closest to you. Bring the side of the paper closest to you up to the edge you just taped, and tape it down as well.

Next, you will want to fold over any excess paper and tape it down. There should be about a 1-inch overhang. Turn the box to its side and fold down the top flap, creasing it neatly. Cut off any excess paper and tape it down. Repeat this process for the bottom flap.

Finally, turn the box to the other side and repeat the process of folding, creasing, cutting, and taping the top and bottom flaps. And that's it! Your T-shirt box is now securely taped and ready for any additional decorations, such as a name tag, ribbons, or bows.

shunvogue

How to add finishing touches to a wrapped t-shirt box

Now that your t-shirt is wrapped, you can add some finishing touches to make it look more appealing and attractive. Here are some ideas to elevate your gift:

Ribbons and Bows

Add a beautiful bow or ribbon to your gift box. You can use a simple ribbon and tie it around the box or get creative with different types of bows and ribbons. Wired ribbons can be a great option as they are easier to shape and less likely to become untied. You can also try making a V-shaped edge by folding the ribbon in half and cutting a straight diagonal line.

Gift Tags

Include a gift tag with the recipient's name or a heartfelt message. You can attach the tag to the ribbon or use a string or thread to hang it from the box.

Embellishments

Feel free to get creative with embellishments such as flowers, stickers, or any other decorations that you like. You can also add foraged plant foliage under the ribbon to give it a natural touch.

Tissue Paper

If you haven't already used tissue paper to wrap your t-shirt, you can use it as a finishing touch. Place the shirt on top of two or more sheets of tissue paper, depending on the size of the shirt. Then, gently wrap the tissue paper around the shirt, creating a neat square or rectangle. Secure it with tape or a ribbon.

Remember, the finishing touches are a great way to personalise your gift and make it extra special for the recipient.

Frequently asked questions

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment