
T-shirt quilts are a great way to preserve memories and breathe new life into old T-shirts. When making a T-shirt quilt, it is important to consider the size of the logos on the T-shirts. If you have a lot of T-shirts with small logos, even 50 or 60 of them might not be enough to make a full-sized quilt. In this case, you could consider making a smaller quilt or wall hanging, or you could combine the small logo T-shirts with other fabrics to create a larger quilt. Another option is to cut the T-shirts with extra margin around the design to make the blocks larger. Alternatively, you could add blank blocks of T-shirt material or a border to increase the size of the quilt.
Characteristics | Values |
---|---|
Quilt size | Small quilts are typically used as wall hangings or baby blankets. |
Number of t-shirts | Small quilts can be made with a few t-shirts or even just one. |
Logo size | T-shirts with very small logos may need to be cut smaller to create a symmetrical pattern. |
Quilt style | Mini quilts can be made with one block or multiple blocks. |
Quilt shape | Mini quilts can be landscape or portrait-oriented. |
Quilt backing | Fusible interfacing can be used to back t-shirts, but it may make them stiff. |
Sashing | Sashing can be used to fill in gaps between t-shirts of different sizes. |
Border | Adding a border can make a small quilt larger. |
What You'll Learn
Using small logos to create a wall hanging
T-shirt quilts are a great way to preserve memories and can be used to create wall hangings, too. Small logos on t-shirts can be a challenge when creating quilts, but they can be used to make a unique and interesting wall hanging. Here are some tips on how to use small logos to create a wall hanging:
Planning Your Wall Hanging
First, decide on the t-shirts you want to use. If you have t-shirts with small logos, you may need quite a few of them to make a wall hanging, especially if you want to avoid cropping the logos. Consider the size and number of designs on your t-shirts. T-shirts with small logos may require a larger number to create a wall hanging of a decent size.
Cutting and Measuring
Once you have your t-shirts, it's time to cut and measure. Cut the t-shirts to remove the front panel, sleeves, and seams. You want to leave as much fabric as possible around the logo, so be sure to cut near the side seams. Cut each logo, ensuring it remains centred, and measure the maximum and minimum width and height you could cut for each. This will help you plan your layout.
Layout and Design
Now, you can start planning your layout. This is where you can get creative! Consider the size and orientation of the wall you want to hang your quilt on. You may want to create a symmetrical pattern or go for a more mismatched, quirky design. Play around with the layout until you find something that looks good to you.
Backing and Interfacing
Backing your t-shirts with interfacing will make your life easier when piecing the quilt together. It will make the t-shirt material stiffer and easier to work with, but don't worry, it will go back to being soft and cozy after a few washes. Be very careful to iron the interfacing onto the back of the t-shirts, as doing it on the front can be irreversible.
Sewing and Quilting
Now it's time to sew your wall hanging together. Pin the panels together in your desired design and sew them with a 1/2-inch seam allowance. You can use a sewing machine or do it by hand, whichever you prefer. After sewing the panels, join the rows, matching intersections where the seams meet. Then, cut the batting and backing fabric to the size of your quilt and layer the batting between the top and backing. Sew these layers together, and you're almost done!
Binding
Finally, bind the quilt by sewing strips of fabric around the perimeter to cover the raw edges. You can use a bold and fun design for the binding to add some extra flair to your wall hanging.
Creating a wall hanging with small logos from t-shirts can be a fun and rewarding project. It may take some time and effort, but the end result will be a unique and special piece that you can display in your home.
Authenticating Vintage T-Shirts: A Guide to Knowing the Real Deal
You may want to see also
How to cut small logos from T-shirts
To cut small logos from T-shirts, you can follow these steps:
- Select the T-shirts: Choose the T-shirts you want to use for your quilt. Consider the colours and sizes of the T-shirts and their logos. Smaller T-shirts with small logos will require more careful cutting to preserve the design.
- Measure and sketch: Measure each logo and sketch a layout for your quilt. Take note of whether the logo is on the front or back of the T-shirt, and record the maximum and minimum width and height you can cut while keeping the logo centred.
- Cut with extra allowance: Disassemble the T-shirts by cutting up the sides, sleeves, and neckline, leaving a little extra fabric to ensure you don't cut off too much.
- Layout and symmetry: Lay out the cut T-shirt pieces on the ground as you want them in your quilt to check for symmetry.
- Backing: Apply high-quality backing, such as fusible interfacing, to the T-shirt pieces. This step adds stiffness, but the T-shirts will become soft and cozy again after a few washes.
- Trim: Refer to your measurements and add a seam allowance. Carefully trim the T-shirt pieces to the desired size.
- Sashing: Choose a colour or pattern that complements your T-shirts and overall design.
- Piece together: Layout everything, including the sashing, and piece the quilt top together, either by columns or rows.
- Border: Decide on a border colour that suits your quilt design. Cut and add the border to the quilt.
- Quilt backing: Match the border fabric with the backing, or use a complementary colour or pattern. Purchase enough fabric, and don't forget to iron the backing to prevent bubbles.
Creative Ways to Style Oversized T-Shirt Sleeves
You may want to see also
Creating a symmetrical pattern with small logos
Pick the Right T-Shirts:
Start by selecting t-shirts with small logos that you want to include in your quilt. The smaller the logo, the smaller you'll have to cut it, which may limit your layout options. Consider the size of the t-shirts as well. Having a mix of large and extra small t-shirts might make it tricky to achieve a symmetrical pattern.
Measure and Plan:
Measure each logo and sketch out a layout for your quilt. This will help you determine the maximum and minimum sizes you can cut your logos. Highlight the logos that are a must-have in your quilt, so you can ensure they are included.
Cut with Extra Allowance:
When cutting your t-shirts, add an extra inch or so to all measurements. This gives you some wiggle room for mistakes and ensures you don't cut off too much fabric.
Lay Out and Adjust:
Lay out your t-shirt pieces on the ground as you want them in your quilt. Check for symmetry and make adjustments as needed. Refer back to your measurements to trim any pieces to make the columns or rows equal.
Backing and Trimming:
Backing your t-shirts is important to create a clean and beautiful quilt. Iron high-quality backing to the back of the t-shirts, being careful to not accidentally iron it to the front. After backing, trim your t-shirts by adding a seam allowance to your desired measurements.
Piece It Together:
Now, you can start piecing your quilt top together. Lay out your trimmed t-shirts and sashing (fabric strips between blocks) on the floor. Sew them together, row by row or column by column, being careful to line up the corners of each piece.
Add Borders:
You can add borders to your quilt to make it larger and frame your design. Choose a border color that complements your t-shirts and overall design. You can decide on the border color after your quilt top is mostly pieced together.
Removing Tomato Sauce Stains from a White T-Shirt
You may want to see also
Using small logos for a child's blanket
Choosing the Right T-Shirts:
Start by selecting a bundle of your favourite t-shirts with small logos. It can be emotionally challenging to let go of old t-shirts, but it's worth it for the final product! Consider the size and colour of the t-shirts and logos. Smaller shirts will result in smaller logo cuts, while larger shirts offer more variety in size options. If you have a mix of sizes, aim for symmetry in your layout to avoid a lopsided pattern.
Measuring and Layout:
Measure each logo and sketch a layout for your blanket. Take into account the maximum and minimum width and height you can cut while keeping the logo centred. Highlight the most important logos that must be included. Decide on a common measurement for all t-shirts, whether it's a symmetrical, rectangular, or mismatched design.
Cutting and Backing:
Disassemble the t-shirts by cutting up the sides, sleeves, and neckline, retaining only the bare minimum needed. Add an extra inch to all measurements to allow for mistakes. Back the t-shirts with high-quality fusible interfacing to stiffen the fabric and make it easier to work with. Be careful to iron the interfacing onto the back of the t-shirts only.
Trimming and Sashing:
Refer to your measurements and trim the t-shirts accordingly, adding a seam allowance. Use coordinating fabric or sashing (strips of fabric between the panels) to fill in any gaps and enhance the design.
Sewing and Binding:
Pin the panels together according to your desired design, using a sewing machine for efficiency. Sew the panels and sashing together, pressing the seam allowances open. Cut the binding and bind the quilt, using bold and fun designs to add some flair.
Final Steps:
Wash your child's new blanket with Shout Color Catchers and Oxy Clean to prevent colour bleeding. Enjoy the warmth and memories of your unique creation!
Building a T-Shirt Flash Dryer: A DIY Guide
You may want to see also
How to avoid cropping small logos
When making a T-shirt quilt, it is important to avoid cropping off logos or graphics. Here are some tips to achieve that:
Measure and Plan:
Before cutting, measure each logo and sketch a layout. Note the name of the T-shirt, whether the logo is on the front or back, and the maximum and minimum width and height that can be cut around the logo while keeping it centred. Highlight the logos that are a must-have in your quilt. Based on these measurements, decide on a common size for the T-shirt blocks in your quilt.
Cut with Extra Allowance:
When cutting the T-shirts, add an extra inch or two to each side of the block. This gives you some room in case of accidental mistakes and ensures that the logos are not cut off.
Lay Out the T-shirts:
After cutting, lay out the T-shirt pieces on the ground as you want them to appear in the quilt. This will help you visualise the design and ensure that the logos are not cropped.
Choose the Right Quilt Style:
Avoid choosing a traditional style quilt with a single block size, as this can lead to cropping off logos or leaving too much margin around smaller logos. Instead, opt for a puzzle-style quilt with multiple block sizes, allowing you to choose the best size for each logo.
Map Out the Design:
Before cutting the T-shirts, it is crucial to have a clear design in mind. Select T-shirts based on your theme and sketch out the design on paper. Cut out the shape of the blocks and place them over your T-shirts to ensure the design fits well and the logos are not cropped.
By following these steps, you can effectively avoid cropping small logos in your T-shirt quilt, preserving your favourite T-shirts and memories.
The Drop Cut T-Shirt: A Unique Style Statement
You may want to see also
Frequently asked questions
Small T-shirt quilts can be used as wall hangings, children's blankets, dresser or table runners, or as baby blankets.
Measure the logos and sketch a layout. Cut the T-shirts with extra allowance on all sides. Lay out the T-shirts to check for symmetry. Back the T-shirts with high-quality fusible interfacing. Trim the T-shirts, leaving a seam allowance. Piece the quilt top together.
The number of T-shirts you need depends on the size of the quilt and the size of the logos. For a throw blanket-sized quilt, you'll typically need at least 16 T-shirts.
Consider the size of the logos and the size of the T-shirts. Smaller logos will require smaller cuts, while larger T-shirts offer more size options.